Toshiba B-EP Series Interface Specification page 263

5.6.6 BARCODE FORMAT COMMAND
In the case of GS1 Databar
Format [ESC] XBaa; bbbb, cccc, d, e, ff, g, hhhh (, ijjjjjjjjjj, kk) (= sss ------ sss) [LF] [NUL]
[ESC] XBaa; bbbb, cccc, d, e, ff, g, hhhh (, ijjjjjjjjjj, kk) (; tt
[NUL]
Term aa:
bbbb:
cccc:
d:
e:
ff:
g:
hhhh:
ijjjjjjjjjj:
jjjjjjjjjj: Skip value
kk:
Barcode number
00 to 31
X-coordinate of the print origin of barcode
Fixed at 4 digits (in 0.1 mm units)
Y-coordinate of the print origin of barcode
4 or 5 digits (in 0.1 mm units)
Type of barcode
b: GS1 Databar family
Version (Type of GS1 Databer)
1: GS1 Databar Omni-directional
2: GS1 Databar Stacked
3: GS1 Databar Stacked Omni-directional
4: GS1 Databar Limited
5: GS1 Databar Expanded
6: GS1 Databar Expanded Stacked
1-module width
01 to 15 (in units of dots)
Rotational angle of barcode
0: 0°
1: 90°
2: 180°
3: 270°
Height of the barcode
0000 to 1000 (in 0.1 mm units)
Increment/decrement
(Omissible. If omitted, increment/decrement is not performed.)
i: Indicates whether to increment or decrement
+: Increment
-: Decrement
0000000000 to 9999999999
No. of digits after zero suppression
(Omissible. If omitted, zero suppression is not performed.)
00 to 20
* Reserved in the case of the compatible mode for the B-SP series
5-93
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
[ESC] XB
, tt
1 2
B-EP Series
, tt , ------, tt ) [LF]
3 20