Toshiba B-EP Series Interface Specification page 681

11.11.2 STATUS FORMAT
• TPCL Mode
[IrDA: TEC Protocol]
STX ID
01H XXH XXH 3XH 3XH 3XH 3XH 3XH 3XH 3XH XXH XXH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, or wireless LAN interface]
SOH STX
01H 02H 3XH 3XH 3XH 3XH 3XH 3XH 3XH 03H 04H 0DH 0AH
● LABEL, RECEIPT, or ESC/POS Mode
[IrDA: TEC Protocol] Data to be transmitted (fixed at 27 bytes)
STX Printer ID
02H xxH xxH V01 V02
[IrDA :IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, or wireless LAN interface]
Data to be transmitted (fixed at 5 bytes)
STX Printer ID Printer status Battery status
02H xxH xxH
Printer ID : 2-byte hex data (from High to Low)
Printer status : 1-byte data representing the printer status
Battery status : A battery charging condition is represented in 5 levels.
CRC : 2-byte hex data(from Low to High)
ID Status
Status Remaining count
Detail status
Version No. of each form
･････････
xxH
Remaining count
Remaining count
• 0000 to 9999
(Fixed at 0000 in the save mode)
Type of status
• "1" (31H) (In response to a Status Request Command)
• "2" (32H) (Automatic status transmission)
Detail status
ETX EOT
Remaining count
• 0000 to 9999
(Fixed at 0000 in the save mode)
Type of status
• "1" (31H) (In response to a Status Request Command)
• 2" (32H) (Automatic status transmission)
Printer status Battery status
V20 xxH
xxH
11-7
CHAPTER 11 OTHER FUNCTIONS
B-EP Series
CRC CRC
CR LF
CRC
xxH xxH xxH