Receipt Mode; Initial Setting - Toshiba B-EP Series Interface Specification

4.4 RECEIPT MODE

4.4.1

INITIAL SETTING

Mode Select Command
No
<Completion of mode selection>
Writable Character Data Store Command
No
< Completion of storing >
Graphic Data Store Command
No
< Completion of storing >
Mode Select Command
No
< Completion of mode selection >
NOTES: (1) To store the writable character data, the mode should be changed to the LABEL
(2) When a command such as the above is sent, be sure to confirm that the process
(3) The graphic data store command is registerable even after changing the mode to
Start
Yes
Yes
Yes
Yes
End
mode. After storing is finished, the mode should be returned to the RECEIPT
mode.
is completed, before the next command is sent.
the RECEIPT mode.
CHAPTER 4 TRANSMISSION SEQUENCE
[ESC] M: Changes the mode to the LABEL mode.
[ESC] XD: Stores the writable character data.
[ESC] SG: Stores the graphic data.
[ESC] M: Changes the mode to the RECEIPT mode.
4-43
B-EP Series