Toshiba B-EP Series Interface Specification page 646

10.7 COMMANDS RELATED TO FINE ADJUSTMENT
10.7.1 PRINT START POSITION FINE ADJUST COMMAND
Function Adjusts the feed value so that the label will be shifted forward or backward from the
print start position automatically determined.
Format [ESC] AX; abbb, cddd, eff(, g) [LF] [NUL]
Term a:
bbb:
c:
ddd:
e:
ff:
g:
hhh:
[In compatible mode for the B-SP series]
a:
bbb:
c:
ddd:
e:
ff:
g:
hhh:
Indicates the direction, forward or backward, in which a fine adjustment is to be
made.
+: Backward
-: Forward
Fine adjustment value for print position
000 to 500 (in 0.1 mm units)
Indicates the direction of the strip position, forward or backward.
+: Backward
-: Forward
Fine adjustment value for strip position
000 to 030
* In - (Forward) a fine adjustment is to be made between 000 and 020.
Reserved area
Fixed at +.
Reserved area
Fixed at 00.
Reserved area (Omissible)
Reserved area (Omissible)
Indicates the direction, forward or backward, in which a fine adjustment is to be
made.
+: Backward
-: Forward
Fine adjustment value for print position
000 to 500 (in 0.1 mm units)
Reserved area
Fixed at +.
Reserved area
Fixed at 000.
Reserved area
Fixed at +.
Reserved area
Fixed at 00.
Reserved area (Omissible)
Reserved area (Omissible)
CHAPTER 10 SYSTEM MODE (INTERFACE COMMANDS)
[ESC] AX
10-7
B-EP Series