Toshiba B-EP Series Interface Specification page 231

When one field width ≥ specified character string width
(Space between characters ≥ 0, Specified character string digits = 6)
■ Print image when the parameter setting is omitted.
One character width (50 dots)
A
Specified character string width (120 dots)
A = 1 field width – Specified character string width = 215 dots – 120 dots = 95 dots
B = A/Data length = 95 dots/4 ≈ 24 dots (rounded up)
One character width = 1 character width – B=50 dots – 24 dots = 26 dots
■ Print image when the parameter setting is specified.
Space between characters (5 dots)
A B C
Specified character string width (120 dots)
* When the number of print data is 6 digits or more, the condition of ineffectiveness (3) is satisfied.
In this case, the characters are printed in normal width.
1 field width (215 dots)
B C
D
One character width (26 dots)
5-61
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
Space between characters (5 dots)
D
A
B-EP Series