Toshiba B-EP Series Interface Specification page 471

7.2 OUTLINE OF COMMANDS
7.2.1 FORMAT OF INTERFACE COMMAND
ESC
GS
ESC
FF
CAN
The control codes are as follows:
ESC (1BH)
LF (0AH)
NUL (00H)
GS (1DH)
FF (0CH)
CAN (18H)
7.2.2 HOW TO USE REFERENCE
Function
Format
Term
Initial value
Explanation
Refer to
Command
Command
Command
Describes the outline of the function of the command.
Shows the format of the command
The format designation method should conform to the following rules:
• "n" indicates a parameter item.
• Brackets and parentheses are used only in coding, and must not be
transmitted in practice.
• Other symbols must always be inserted at the designated positions before
being transmitted.
Explains the term(s) used in the format.
Indicates the initial value of the parameter (when turning the power on, or
changing the print mode to the RECEIPT mode.)
Explains the command in detail.
Related commands
CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
LF NUL
7-2
B-EP Series