Toshiba B-EP Series Interface Specification page 482

Note (1) If the print ratio of one line (the print head width) is higher than defined, printing
may become poor, or the printer may be reset.
drawn, note the print ratio.
(2) When any line length exceeding the effective print width, the length is corrected to
the maximum head width that varies depending on model.
Max. head width
CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
B-EP2DL-GHxx B-EP4DL-GHxx
48.0 mm
7-13
When a horizontal line is to be
104.0 mm
B-EP Series