Toshiba B-EP Series Interface Specification page 684

11.11.3 DETAIL STATUS
[The compatible mode for the B-SP series is off.]
* The values in the upper cell are provided for LABEL/RECEIPT mode (1 byte HEX).
The values in the lower cell are provided for TPCL mode (2 bytes ASCII).
LCD Message of the
No.
Upper Line
(English)
ON LINE
ON LINE
LBL PRESENT ****
ON LINE
1
ON LINE
ON LINE
ON LINE
COVER OPEN
2
PAUSE ****
3
COMMS ERROR
4
PAPER JAM ****
5
NO PAPER ****
6
NO PAPER
7
COVER OPEN ****
8
HEAD ERROR
9
EXCESS HEAD TEMP
10
SAVING #### &&&&
11
FORMAT ERROR
12
FLASH WRITE ERR.
13
Printer Status
The printer is in the online mode.
The printer is in the online mode (or
communicating).
A label is waiting to be stripped.
A label issue has been completed normally.
A feed has been completed normally.
A head broken dots check has been completed
normally.
Initialization has been completed normally.
The front cover was opened in the online mode.
The printer is in a pause state.
A parity error, overrun error, or framing error has
occurred during communication through the RS-
232C interface.
A paper jam has occurred during a paper feed.
The paper has run out.
A label has been completed normally, and then the
paper has run out.
An attempt was made to feed or issue with the
cover opened (except the [PAUSE] key).
A broken element has been found on the thermal
head.
The print head temperature has exceeded 71 °C.
The printer is in writable character or PC command
save mode.
An erase error has occurred in formatting the flash
memory.
An error has occurred in writing data into the flash
memory.
11-10
CHAPTER 11 OTHER FUNCTIONS
B-EP Series
Detail Status
Auto Status Status Request
Transmission Command
00H
"00"
0BH
"02"
0FH
"05"
*1
10H
"40"
"41"
00
10H
01H
"01"
14H
"04"
0CH 0CH
03H 03H
"11" "11"
04H 04H
"13" "13"
0DH 0DH
"09" "09"
05H 05H
"15" "15"
06H 06H
"17" "17"
07H 07H
"18" "18"
55H
"55"
09H 09H
"51" "51"
08H 08H
"50" "50"