Toshiba B-EP Series Interface Specification page 220

5.6.3 OUTLINE FONT FORMAT COMMAND
Function Sets the format to indicate where and how the outline font is to be printed.
Format [ESC] PVaa; bbbb, cccc, dddd, eeee, f (, ghhh), ii, j (, Mk) (, lmmmmmmmmmm)
(, Znn) (, Po) (, lpp) (, Qoooo, Rpp) (= qqq ------ qqq) [LF] [NUL]
[ESC] PVaa; bbbb, cccc, dddd, eeee, f (, ghhh), ii, j (, Mk) (, lmmmmmmmmmm)
(,Znn) (,Po) (, lpp) (, Qoooo, Rpp) (; rr
Term aa:
bbbb:
cccc:
dddd:
eeee:
f:
ghhh:
ii:
Character string number
00 to 99
X-coordinate of the print origin of character string
Fixed at 4 digits (in 0.1 mm units)
Y-coordinate of the print origin of character string
4 or 5 digits (in 0.1 mm units)
Width of the character
0020 to 0850 (in 0.1 mm units)
Height of the character
0020 to 0850 (in 0.1 mm units)
Type of font
A: TEC FONT1 (Helvetica [bold])
B: TEC FONT1 (Helvetica [bold], proportional)
E: Print front 1
F: Price font 2
G: Price font 3
K: Reserved
C, D, H, I, J: Reserved (If specified, it is processed as "B.")
Fine adjustment of character-to-character space
(Omissible. If omitted, space is adjusted according to the designated font.)
g: Designates whether to increase or decrease the character-to-character
space.
+: Increase
-: Decrease
hhh: No. of space dots between characters
000 to 512 (in units of dots)
Rotational angles of a character and character string
00: 0° (char.)
11: 90° (char.)
22: 180° (char.)
33: 270° (char.)
5-50
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
[ESC] PV
, rr , rr , ------ , rr
1 2 3
0° (char.-string)
90° (char.-string)
180° (char.-string)
270° (char.-string)
B-EP Series
) [LF] [NUL]
20