Toshiba B-EP2DL Series System Mode Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Printer
  5. B-EP2DL Series
  6. System mode manual

Toshiba B-EP2DL Series System Mode Manual

Hide thumbs Also See for B-EP2DL Series:
Table of Contents

Advertisement

Quick Links

TOSHIBA Portable Printer
B-EP2DL/EP4DL SERIES
System Mode Manual
Document No. EO13-33005
Original
Sep., 2008
(Revised
)

Advertisement

Table of Contents
loading

Related Manuals for Toshiba B-EP2DL Series

Summary of Contents for Toshiba B-EP2DL Series

  • Page 1 TOSHIBA Portable Printer B-EP2DL/EP4DL SERIES System Mode Manual Document No. EO13-33005 Original Sep., 2008 (Revised...

  • Page 2: Table Of Contents

    EO13-33005 TABLE OF CONTENTS Page 1. INTRODUCTION----------------------------------------------------------------------------------------------------- 1- 1 Key Operation Flowchart -----------------------------------------------------------------------------------------1- 1 Operation panel -----------------------------------------------------------------------------------------------------1- 2 2. WIRELESS LAN AND BLUETOOTH PARAMETER PRINT -------------------------------------------- 2- 1 3. ONLINE MODE ------------------------------------------------------------------------------------------------------ 3- 1 Outline of the ON LINE Key Operation------------------------------------------------------------------------3- 1 LCD Display Startup -----------------------------------------------------------------------------------------------3- 2 3.2.1 LCD Display at Startup of Wireless LAN model ----------------------------------------------------------- 3- 3...
  • Page 3 EO13-33005 Parameter Setting -------------------------------------------------------------------------------------------------4-26 4.4.1 Parameter Setting Operation Example --------------------------------------------------------------------- 4-26 4.4.2 LCD Density Setting (LCD DENSITY) ---------------------------------------------------------------------- 4-27 4.4.3 Character Code Setting (FONT CODE) -------------------------------------------------------------------- 4-28 4.4.4 Font Zero Setting (ZERO CODE) ---------------------------------------------------------------------------- 4-29 4.4.5 LCD Language Setting (LCD) -------------------------------------------------------------------------------- 4-30 4.4.6 Control Code Setting (CODE) -------------------------------------------------------------------------------- 4-31 4.4.7...
  • Page 4 7.6.4 Download by IrDA(IrCOMM) ----------------------------------------------------------------------------------- 7- 9 CAUTION! 1. This manual may not be copied in whole or in part without prior written permission of TOSHIBA TEC. 2. The contents of this manual may be changed without notification. 3. Please refer to your local Authorised Service representative with regard to any queries you may have in this manual.

  • Page 5: Introduction

    1. INTRODUCTION EO13-33005 1.1 Key Operation Flowchart 1. INTRODUCTION This document describes key operations using the keys and LCD display on the printer that you can operate on a printer alone. Key operations are performed in the following four printer setting modes: •...

  • Page 6: Operation Panel

    1. INTRODUCTION EO13-33005 1.2 Operation Panel 1.2 Operation Panel The figure below illustrates the Operation Panel and key functions. LCD Message Display [FEED] [POWER] POWER FEED PAUSE [PAUSE] STATUS CHARGE CHARGE LED STATUS LED The LCD Message Display shows messages in alphanumeric characters and symbols to indicate the printer’s status.
  • Page 7 1. INTRODUCTION EO13-33005 1.2 Operation Panel Illuminates when… CHARGE CHARGE LED displays the state below. • (Orange) Connection status of the AC adapter • Battery charge Illumination pattern • Power OFF AC adapter not connected AC adapter connected Charging Orange/ON Full charge Temperature error Orange/Blink Ambient temperature...
  • Page 8 1. INTRODUCTION EO13-33005 1.2 Operation Panel Function of the LCD Radio intensity mark: Indicates a radio intensity level (when wireless LAN is enabled (LAN=ON) for the wireless LAN model). Adhoc Infrastracture ON: Out of range ON: Paused due to wrong setting Radio intensity ON: X ≤...
  • Page 9 1. INTRODUCTION EO13-33005 1.2 Operation Panel External power source mark: Indicates a connection status with an AC adaptor. External power source OFF: Not connected ON: Connected Battery level mark: Indicates a remaining battery power level. ON: (Level1) Inoperative (low battery) ON: (Level2) Low (near-low battery) ON: (Level3) Medium Battery level...
  • Page 10 1. INTRODUCTION EO13-33005 1.2 Operation Panel (8) LCD message and LED indication Acceptance of LED Indication Restoration Status Request LCD Message Printer Status by PAUSE Reset Command key Yes/No Yes/No STATUS ON LINE Online mode ----- ON LINE Online mode (communicating) ----- ON LINE Strip wait...
  • Page 11 1. INTRODUCTION EO13-33005 1.2 Operation Panel Acceptance of LED Indication Restoration Status Request LCD Message Printer Status by PAUSE Reset Command key Yes/No Yes/No STATUS When the following abnormal operations are performed, a system error occurs: (a) Command fetch from an odd address (b) Access to word data at an odd address (c) Access to long-word data at an odd address (d) Access to the area of 80000000H to...
  • Page 12 1. INTRODUCTION EO13-33005 1.2 Operation Panel Symbols in the message ∆ : The LED is flashing (Red) □ : The LED is illuminated. (Red) : The LED is illuminated. (Green or Orange) : The LED is flashing (Green) : The LED is unlit. ****: the number of unprinted media.
  • Page 13 1. INTRODUCTION EO13-33005 1.2 Operation Panel Dutch Spanish Italy IN LIJN ON LINE PRONTA DEKSEL OPEN TAPA ABIERTA TESTATA APERTA PAUZE **** PAUSA **** PAUSA **** COMM. FOUT ERROR COMUNICACI ERR. COMUNICAZ. PAPIER VAST **** ATASCO PAPEL**** CARTA INCEP.**** PAPIER OP **** SIN PAPEL **** NO CARTA ****...

  • Page 14: Wireless Lan And Bluetooth Parameter Print

    2. WIRELESS LAN AND BLUETOOTH PARAMETER PRINT EO13-33005 2 WIRELESS LAN AND BLUETOOTH PARAMETER PRINT 2. WIRELESS LAN AND BLUETOOTH PARAMETER PRINT The B-EP with the Bluetooth module or the wireless LAN module performs a parameter print when the [POWER] key is pressed for 3 seconds or more after the printer power is turned on and a “ON LINE”...

  • Page 15: Online Mode

    3. ONLINE MODE EO13-33005 3.1 Outline of the ON LINE Key Operation 3. ONLINE MODE 3.1 Outline of the ON LINE Key Operation ON LINE Mode Hold down [FEED]+ [PAUSE]+ [POWER] (3 sec. or more) Forced power OFF Press the [POWER] key (more than 3 seconds) Power OFF Press the [FEED] key...

  • Page 16: Lcd Display Startup

    3. ONLINE MODE EO13-33005 3.2 LCD Display Startup 3.2 LCD Display Startup This section explains indication of the LCD at the power ON. Power OFF Press the [POWER] key to turn the power on. Startup of IPL B - E P 2 D L 2 J 1 0 A 1 0 B Startup of main program B - E P 2 D L G 2 J 1 0 A 1 0 B...

  • Page 17: Lcd Display At Startup Of Wireless Lan Model

    3. ONLINE MODE EO13-33005 3.2 LCD Display Startup 3.2.1 LCD Display at Startup of Wireless LAN model When the B-EP with the wireless LAN module is startup with the DHCP enabled, an IP address is obtained and the LCD display will be as shown below. When successfully connected to the DHCP server: D H C P I N I T I A L Connecting to the DHCP server...

  • Page 18: Setting Value Display

    3. ONLINE MODE EO13-33005 3.2 LCD Display Startup 3.2.2 Setting Value Display (1) RS-232C model Function ON R S 1 1 5 2 0 0 b p s N O N E Parity: EVEN NONE Baud rate _ _ 9 6 0 0 _ 1 9 2 0 0 _ 3 8 4 0 0 _ 5 7 6 0 0...

  • Page 19: Ir Setting Value Display

    3. ONLINE MODE EO13-33005 3.2 LCD Display Startup 3.2.3 Ir Setting Value Display When IrOBEX/IrCOMM is selected: I r O B E X / I r C O M M When TEC protocol is selected: I r T E C 1 1 5 2 0 0 b p s Baud rate _ _ 9 6 0 0 _ 1 9 2 0 0...

  • Page 20: Example Of Online Mode Operation

    3. ONLINE MODE EO13-33005 3.3 Example of ONLINE Mode Operation 3.3 Example of ONLINE Mode Operation Turn the power on. This message is displayed at a startup of IPL. B-EP2DL 2J10 10 This message is displayed at a startup of main program. B-EP2DLG2J10 10 This message is displayed in idle mode or normal issue mode.

  • Page 21: Manual Threshold Setting

    3. ONLINE MODE EO13-33005 3.4 Manual Threshold Setting 3.4 Manual Threshold Setting To maintain a constant print position the printer uses the Transmissive Sensor to detect the gap between labels by measuring the amount of light passing through the media. When the media is preprinted, the darker (or more dense) inks can interfere with this process causing paper jam errors.

  • Page 22: Reset Mode

    3. ONLINE MODE EO13-33005 3.5 Reset Mode 3.5 Reset Mode Reset operation clears the print data sent to the printer from the computer, and returns the printer to an idle condition. Rest operation procedure ON LINE The printer is turned on, standing by, or printing. Press the [PAUSE] key.

  • Page 23: Mode Setting

    3. ONLINE MODE EO13-33005 3.6 Mode Setting 3.6 Mode Setting This mode used to following setting. LCD Message Description Default Setting PCL Mode Printer Command Language Setting TPCL HEAD DIV Head division setting B-EP2: AUTO1 (automatic selection from none, 2 or 3 division) B-EP4: AUTO1 (automatic selection from none, 2, 3 or 6...

  • Page 24: Parameter Setting

    3. ONLINE MODE EO13-33005 3.7 Parameter Setting 3.7 Parameter Setting This parameter setting used to following setting. LCD Message Description Default Setting LCD DENSITY LCD density setting FONT CODE Character code setting PC-850 ZERO FONT Font 0 setting 0 (without slash) LCD language setting ENGLISH CODE...
  • Page 25 3. ONLINE MODE EO13-33005 3.7 Parameter Setting Continued from the previous page. CODE AUTO Control code setting [POWER] Press the [POWER] key. EURO CODE EURO font code setting Press the [POWER] key. [POWER] MAXI CODE MaxiCode specification setting [POWER] Press the [POWER] key. AUTO OFF 120min Auto power-off timing setting Press the [POWER] key.

  • Page 26: Printer Parameter Fine Adjustment

    3. ONLINE MODE EO13-33005 3.8 Printer Parameter Fine Adjustment 3.8 Printer Parameter Fine Adjustment This printer paranmeter fine adjustment used to following setting. LCD Message Description Default Setting FEED ADJ. Feed Amount Fine Adjustment +0.0mm X ADJUST X coordinate Fine Adjustment +0.0mm TONE ADJ.
  • Page 27 3. ONLINE MODE EO13-33005 3.8 Printer Parameter Fine Adjustment Continued from the previous page. PAPER SIZE 114mm Paper size for ESC/POS setting Press the [POWER] key. [POWER] <4>ADJUST SET System mode menu display (Fine adjustment value setting) [POWER] Press and hold the [POWER] key for at least 3 seconds. <1>RESET The reset menu is displayed.

  • Page 28: Dump Mode

    3. ONLINE MODE EO13-33005 3.9 DUMP Mode 3.9 DUMP Mode In dump mode, data in the receive buffer are printed. Data are expressed in hexadecimal values. This operation allows the user to verify programming commands or debug the program. • How to Perform a Dump Operation ON LINE The printer is turned on, standing by, or printing.
  • Page 29 3. ONLINE MODE EO13-33005 3.9 DUMP Mode NOTE: If an error occurs during dumping, the printer will display an error message and stop printing. The error can be cleared by pressing the [PAUSE] key, and then the display will show “<5>DUMP MODE” again. After a recovery from the error the printer will not start printing automatically.

  • Page 30: Basic Expansion Mode

    3. ONLINE MODE EO13-33005 310 BASIC Expansion Mode 3.10 BASIC Expansion Mode It is possible to execute the BASIC expansion mode program in BASIC expansion mode under the following conditions: • The BASIC expansion mode program has already been loaded. •...

  • Page 31: Interface Setting

    PARITY RS-232C parity setting EVEN (4) Bluetooth LCD Message Description Default FACTORY TEST In-process inspection setting (Device Nickname: TOSHIBA TEC BT) INQUIRY Inquiry scan time setting EVERY SECURITY Security Level Setting SCN INTERVL Inquiry/Page Scan Interval Setting 2048 SCN WINDOW...
  • Page 32 3. ONLINE MODE EO13-33005 3.11 Interface Setting Operation Example ON LINE The printer is turned on, standing by, or printing. [PAUSE] Press the [PAUSE] key. PAUSE “PAUSE” is displayed. [PAUSE] Press and hold the [PAUSE] key for at least 3 seconds. <1>RESET The reset menu is displayed.

  • Page 33: Basic Setting

    3. ONLINE MODE EO13-33005 3.12 BASIC Setting 3.12 BASIC Setting The Basic function enables the printer to operate with the program created for other printers, by converting it to Basic program and downloading this Basic program to the printer. This BASIC setting used to following setting. LCD Message Description Default...
  • Page 34 3. ONLINE MODE EO13-33005 3.12 BASIC Setting NOTE: When the BASIC setting is ON, the issue mode automatically changes to TPCL mode, and afterwards, the issue mode does not change even when the BASIC setting is set to OFF. To select other mode, change the mode following the Mode setting procedure.

  • Page 35: System Mode (For Service Persons And System Administrators)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4. SYSTEM MODE (For Service Persons and System Administrators) 4. SYSTEM MODE (For Service Persons and System administrators) In this mode, self-test and parameter settings are performed. Described below is the key operation procedure in system mode.

  • Page 36: Flowchart Of System Mode

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.1 Flowchart of System Mode 4.1 Flowchart of System Mode Power OFF Invalid password (3rd time) [FEED] + [POWER] Invalid password (1st, 2nd time) Password entry Valid password [FEED] or [PAUSE]: Selects an item. [POWER]: Determines the selection.

  • Page 37: Diagnostic Test

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test 4.2 Diagnostic Test In the Self-diagnostic test mode, the printer automatically checks and prints out the printer system information such as the sensor status or interface, and the maintenance counter. Also it performs a print head broken element check, LED check, LCD check and beep check.

  • Page 38: Print Thead Broken Element Check

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test 4.2.2 Print tHead Broken Element Check This function is used to check for any broken thermal elements of the print head. If blurred print or missing dots occurs, this check helps you find whether the thermal elements are actually broken or the print head is just stained.

  • Page 39: Led Check

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test 4.2.3 LED Check This function is used to check for LED. While holding down the [FEED] key, press the [POWER] key to turn the Power OFF power on. [FEED] and [Power] Keys <0>SHUTDOWN System mode menu display (Shutdown)

  • Page 40: Lcd Check

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test 4.2.4 LCD Check This function is used to check for the LCD. While holding down the [FEED] key, press the [POWER] key to turn the Power OFF power on.

  • Page 41: Beep Check

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test 4.2.5 Beep Check This function is used to check for the Buzzer. While holding down the [FEED] key, press the [POWER] key to turn the Power OFF power on.

  • Page 42: Print Sample Of Self-Test Result

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test 4.2.6 Print Sample of Self-test result Maintenance counter values and various parameter values TOTAL FEED 0.0m[JA] TOTAL PRINT 0.0m FEED 0.0m FEED1 0.0m FEED2 0.0m FEED3 0.0m (Continued from the left) FEED4 0.0m...
  • Page 43 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 (Revision Date: Nov. 7, 2008) 4.2 Diagnostic Test Self-test Result Items Maintenance counter values Item Description Range TOTAL FEED Total label distance covered 0.0 to 320000.0 m (cannot be cleared) in units of 10 cm TOTAL PRINT Total label print distance covered...
  • Page 44 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Various parameter values Item Description Value [PC] FEED Feed amount fine adjustment -50.0mm to +50.0mm (See NOTE under the table.) TONE(T) Print tone fine adjustment -30step to +30step PEEL Strip position fine adjustment -2.0mm to +3.0mm...
  • Page 45 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Item Description Value CODE Control code AUTO: Automatic selection ESC LF NUL: ESC LF NUL method { | }: { | } method EURO CODE EURO font code Any code AUTO HD CHK Automatic print head check for...
  • Page 46 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Item Description Value BASIC BASIC interpreter OFF: BASIC interpreter function is disabled. ON: BASIC interpreter function is enabled. BASIC TRACE BASIC trace OFF: BASIC trace function is disabled. ON: BASIC trace function is enabled.
  • Page 47 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Item Description Value <<WLAN Setting> * When the wireless LAN module is installed. Wireless LAN enable/disable OFF: Disable ON: Enable PRTR IP Printer IP address ***.***.***.*** GATE IP Printer gateway IP address ***.***.***.*** SUBNET...
  • Page 48 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Item Description Value 802.11b CHANNEL 802.11b channel 1 to 14 802.11b BAUD RATE 802.11b baud rate 5.5M 802.11g CHANNEL 802.11g channel 1 to 13 802.11g BAUD RATE 802.11g baud rate 5.5M NOTE:...
  • Page 49 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Automatic self-test B-EP2DL-G MAIN 01JAN2008 V1.0 :A700 BOOT 01JAN2008 V1.0 :2400 SBCS C/G V1.0 :0D00 DBCS JAPANESE V1.0 :0A00 HTML 01JAN2008 V1.0 :AB00 EEPROM SDRAM 16MB SENSOR1 00000000,00000000 SENSOR2 [H]+20°C [A]+22°C [R]4.2V [T]2.5V PE LV.
  • Page 50 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Automatic self-test (when there is an invalid setting) B-EP2DL-G MAIN 01JAN2008 V1.0 :A700 BOOT 01JAN2008 V1.0 :2400 SBCS C/G V1.0 :0D00 DBCS JAPANESE V1.0 :0A00 HTML 01JAN2008 V1.0 :AB00 EEPROM SDRAM 16MB...
  • Page 51 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Details of self-test print B-EP4DL-T Model name B-EP2DL-G: B-EP2, 203 dpi B-EP4DL-G: B-EP4, 203 dpi B-EP4DL-T: B-EP4,, 300 dpi MAIN 01JAN2008 V1.0A: 1A00 Checksum Version Creation date (Day-Month-Year) Name MAIN: Program area BOOT 01JAN2008 V1.0 : 2400...
  • Page 52 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test HTML 01JAN2008 V1.0 :AB00 Checksum Version Creation date (Day-Month-Year) Name HTML: HTML area EEPROM OK OK: Data in the check area can be properly read/written. NG: Data in the check area cannot be properly read/rewritten. Backup memory (EEPROM) SDRAM 16MB Capacity of SDRAM...
  • Page 53 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test SENSOR2 [H]+20 C [A]+22 ° ° Ambient thermistor status (-15 °C to 99°C, --°C: if the temperature cannot be detected) Thermal head thermistor status (-15 °C to +70 °C) [R]4.2V [T]2.5V Transmissive sensor status (0.0V to 5.0V) Reflective sensor status (0.0V to 5.0V)
  • Page 54 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.2 Diagnostic Test Installed Interface I/F USB/IrDA/WLAN USB/IrDA/232C USB/IrDA/BT USB/IrDA/WLAN USB/IrDA/BT/232C * USB/IrDA/WLAN/232C * * When a label is issued with the RS-232C function set to ON by a set command and the RS-232C cable connected to the printer, the LCD displays “232C”.

  • Page 55: Mode Setting (Printer Operation Mode)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.3 Mode Setting (Printer Operation Mode) 4.3 Mode Setting (Printer Operation Mode) This mode used for the setting of various operation of the printer. 4.3.1 Mode Setting Operation Example While holding down the [FEED] key, press the [POWER] key to turn the power Power OFF [FEED] and [Power] Keys <0>SHUTDOWN...

  • Page 56: Print Command Language Setting (Pcl Mode)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.3 Mode Setting (Printer Operation Mode) 4.3.2 Print Command Language Setting (PCL MODE) This setting selects print mode. PCL MODE TPCL Select to TPCL mode (Factory Default) [PAUSE] PCL MODE TPCL1 Select to TPCL1 mode [PAUSE]...

  • Page 57: Head Division Setting (Head Div)

    4.3.3 Head Division Setting (HEAD DIV) When a printing ratio per line is high, the value of this setting is changed to prevent print tone from becoming lighter. (1) B-EP2DL Series HEAD DIV AUTO1 Automatic selection from none, 2 or 3 division (Factory default)

  • Page 58: B-Sp Series Compatibility Mode Setting (B-Sp Mode)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.3 Mode Setting (Printer Operation Mode) 4.3.4 B-SP Series Compatibility Mode Setting (B-SP MODE) This setting enables the use of software assets created during the development of the B-SP series. B-SP MODE B-SP series compatibility mode is disabled.

  • Page 59: Print Type Setting (Print Type)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.3 Mode Setting (Printer Operation Mode) 4.3.6 Print Type Setting (PRINT TYPE) This setting is issue mode setting. Print depending on the sensor used PRINT TYPE AUTO (Automatic selection from Batch or STRIP) (Factory default) [PAUSE] PRINT TYPE BATCH Fixed to batch issue...

  • Page 60: Parameter Setting

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4 Parameter Setting In the Parameter Setting mode, various kinds of parameters, such as communication, key, LCD, etc. can be set. This will allow a use of the printer to comply with your operating conditions. 4.4.1 Parameter Setting Operation Example While holding down the Power OFF...

  • Page 61: Lcd Density Setting (Lcd Density)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.2 LCD Density Setting (LCD DENSITY) This setting is to adjust the LCD display density. (Factory Default is 0) Light LCD DENSITY -5 [PAUSE] LCD DENSITY -4 [PAUSE] LCD DENSITY -3 [PAUSE]...

  • Page 62: Character Code Setting (Font Code)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.3 Character Code Setting (FONT CODE) This setting is select to character code. FONT CODE PC-850 PC-850 (UTF-8) (Factory default) FONT CODE PC-852 PC-852 [FEED] PC-857 FONT CODE PC-857 PC-8 FONT CODE PC-8 PC-851...

  • Page 63: Font Zero Setting (Zero Code)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.4 Font Zero Setting (ZERO CODE) This setting determines how zero should be displayed/printed, “Ø” (with slash) or “0” (without slash). 0: Without slash (Factory default) ZERO FONT [PAUSE] Ø...

  • Page 64: Lcd Language Setting (Lcd)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.5 LCD Language Setting (LCD) This setting selects a language to be used for displaying messages on the LCD. ENGLISH ENGLISH (Factory default) German GERMAN [FEED] French FRENCH Dutch DUTCH...

  • Page 65: Control Code Setting (Code)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.6 Control Code Setting (CODE) This setting selects a control code to be used in TPCL mode. Automatic selection between {.|.} method CODE AUTO and ESC.LF.NUL method (Factory default) [FEED] CODE {,|,}...
  • Page 66 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting Power ON Reads received data. <Is the received data ESC?> <Is the received data { ?> Discards of read data. Assume a control code to be Assume a control code ESC.LF.NUL.

  • Page 67: Euro Font Code Setting (Euro Code)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.7 Euro Font Code Setting (EURO CODE) This setting determines to which code the EURO font code is to be assigned. (Factory default is “B0”.) EURO CODE [FEED] EURO CODE EURO CODE...

  • Page 68: Auto Power-Off Timing Setting (Auto Off)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.9 Auto Power-off Timing Setting (AUTO OFF) This setting selects a time for the printer power to turn off automatically. (Factory default is 120min.) The power is not automatically turned off. AUTO OFF [PAUSE] AUTO OFF...

  • Page 69: Power Save Mode Timing Setting (Sleep)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.10 Power Save Mode Timing Setting (SLEEP) This setting selects a time for the printer to enter power save mode. When the printer enters power save mode, the sleep mark on the LCD turns on.

  • Page 70: Lcd Backlight Off Timing Setting (Lcd Off)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.11 LCD Backlight Off Timing Setting (LCD OFF) This setting selects a time to turn off the LCD backlight. (Factory default is 3 sec.) LCD OFF The LCD backlight does not turn off. [PAUSE] It takes a shorter time to turn off the LCD backlight.

  • Page 71: Automatic Print Head Check For Broken Dots At Power On Setting (Auto Hd Chk)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.12 Automatic Print Head Check for Broken Dots At Power On Setting (AUTO HD CHK) This setting selects whether or not an automatic print head check for broken dots is to be automatically performed when the power is turned on.

  • Page 72: Resume Printing After Broken Dots Error Setting (Head Err Prt)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.14 Resume Printing After Broken Dots Error Setting (HEAD ERR PRT) This setting selects whether or not the printer resumes printing after a broken dots error occurs. The printer does not resume printing after a broken dots error HEAD ERR PRT OFF [FEED]...

  • Page 73: Beep Volume Setting (Beep Vol)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.16 Beep Volume Setting (BEEP VOL) This setting selects a beep volume. (Factory default is “1”.) BEEP VOL The buzzer does not sound (no beep). [PAUSE] Low volume BEEP VOL [PAUSE] BEEP VOL...

  • Page 74: System Mode Password Setting (Password)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting 4.4.18 System Mode Password Setting (PASSWORD) This setting selects whether or not a new password, which is required to enter system mode for service persons and system administrators, is to be programmed. (Factory default is OFF (Password is “0000”.)) PASS WORD OFF---- Password is not set.
  • Page 75 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.4 Parametr Setting System Mode Startup Method When Password Is Set When a valid password is entered: Power OFF While holding down the [FEED] key, press the [POWER] key to turn the power on.

  • Page 76: Printer Parameter Fine Adjustment

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5 Printer Parameter Fine Adjustment In the Printer Parameter Fine Adjustment mode, you can fine adjust each parameter, such as Print tone, Print start position, Threshold, etc. which are set by the PC command. This is useful when using several types of media by turns or when the print start position or cut/strip position is required to be fine adjusted.

  • Page 77: Feed Amount Fine Adjustment (Feed Adj.)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5.2 Feed Amount Fine Adjustment (FEED ADJ.) This parameter is to fine adjust a feed amount after printing (= to fine adjust the next media’s print start position).

  • Page 78: X-Coordinate Fine Adjustment (X Adjust.)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5.3 X-coordinate Fine Adjustment (X ADJUST.) This setting sets an amount by which the X-coordinate is shifted to the left or right. Use the [PAUSE] key to select a desired option. (Range: -99.9mm to +99.9mm) X ADJUST +99.9mm [FEED] X ADJUST +99.8mm...

  • Page 79: Print Tone Fine Adjustment (Tone Adj.)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5.4 Print Tone Fine Adjustment (TONE ADJ.) This setting finely adjusts the print tone against the value automatically set. TONE ADJ. -30 Lighter TONE ADJ. -29 [FEED] Standard TONE ADJ.

  • Page 80: Reflective Sensor Manual Threshold Fine Adjustment (Threshold)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5.5 Reflective Sensor Manual Threshold Fine Adjustment (THRESHOLD<R>) This parameter is to set a threshold voltage of the black mark sensor. THRESHOLD<R>0.0V THRESHOLD<R>0.1V [FEED] THRESHOLD<R>0.2V THRESHOLD<R>3.9V [PAUSE] THRESHOLD<R>4.0V...

  • Page 81: Transmissive Sensor Manual Threshold Fine Adjustment (Threshold)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5.6 Transmissive Sensor Manual Threshold Fine Adjustment (THRESHOLD<T>) This parameter is to set a threshold voltage of the feed gap sensor. THRESHOLD<T>0.0V THRESHOLD<T>0.1V [FEED] THRESHOLD<T>0.2V THRESHOLD<T>3.9V [PAUSE] THRESHOLD<T>4.0V...

  • Page 82: Strip Position Fine Adjustment (Peel Adj.)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5.7 Strip Position Fine Adjustment (PEEL ADJ.) This parameter is to fine adjust a strip position. Use the [PAUSE] key to select a desired option. (Range: -2.0mm to +3.0mm) PEEL ADJ.-2.0mm PEEL ADJ.-1.9mm [FEED]...
  • Page 83 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment Regardless of gap length, the stop position in strip issue mode is designed in a manner so that printing stops when the distance from the top edge of the strip shaft to the trailing edge of the label is 2.35 2.35 mm mm, if print position fine adjustment value is not set.

  • Page 84: Paper Size For Esc/Pos Setting (Paper Size)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.5 Printer Parameter Fine Adjustment 4.5.8 Paper Size for ESC/POS Setting (PAPER SIZE) This parameter is used for label size setting at the ESC/POS mode. B-EP4D Series B-EP2D Series (Range: 50 ~ 114mm, Factory Default: 114mm) (Range: 25 ~ 58mm, Factory default:58mm) PAPER SIZE 25mm PAPER SIZE 50mm...

  • Page 85: Test Print

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print 4.6 Test Print In the Test Print mode, you can print the test patterns and set print conditions for a test print. This is useful to check the print quality of new media. 4.6.1 Test Print Operation Example (1) Normal Test Print <5>TEST PRINT...
  • Page 86 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print (2) Assembly process test print <5>TEST PRINT System mode menu display (Test Print) [POWER] PRINT CONDITION Test print condition parameter setting mode [PAUSE] x 6 Press the [PAUSE] key six times. FACTORY TEST Assembly process test line print mode [PAUSE]...

  • Page 87: Test Print Setting Item

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print 4.6.2 Test Print Setting Item <5>TEST PRINT System mode menu display (Test Print) [POWER] PRINT CONDITION Test print condition parameter setting mode [PAUSE] SLANT LINE(1DOT) 1-dot slant line print [PAUSE] SLANT LINE(3DOT) 3-dot slant line print...
  • Page 88 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print • Operation for assembly process automatic print /transmissive or refractive sensor When assembly process automatic print /transmissive sensor is selected: AUTO PRINT(TRAN) Automatic print mode (transmissive sensor) [POWER] AUTO PRINT(TRAN) Label position check (feed to top of feed)

  • Page 89: Test Print Condition Setting (Print Condition)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print 4.6.3 Test Print Condition Setting (PRINT CONDITION) The print conditions for the Test Print should be specified before printing. PRINT CONDITION Test print condition parameter setting mode [POWER] ISSUE COUNT Issue count setting...
  • Page 90 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print Issue Count Setting (Issue Count) This setting sets the number of labels to be printed for test print. ISSUE COUNT 1 label (Factory default) 3 labels ISSUE COUNT [FEED] ISSUE COUNT 5 labels...
  • Page 91 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print Sensor type selection This setting selects a print type, auto mode using the strip sensor or fixed mode (BATCH or STRIP) regardless of a sensor status. TYPE AUTO Print depending on the sensor used (Factory default) [FEED]...
  • Page 92 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print Paper Feed Mode Setting (PAPER) This setting is used to feed a paper without performing printing in system mode where the [FEED] key is invalid to feed a paper. TYPE AUTO Paper is not fed.

  • Page 93: Test Print Samples

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print 4.6.4 Test Print Samples • Enlarged view of slant lines 1-dot slant line print (Print ratio: 16.7%) 3-dot slant line print (Print ratio: 16.7%) • 1-dot slant line print (B-EP2) •...
  • Page 94 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print • 3-dot slant line print (B-EP4) • Character print (Chinese) (B-EP2/203 dpi) • Character print (Kanji) (B-EP2/203 dpi) • Character print (Korea) (B-EP2/203 dpi) 4- 60...
  • Page 95 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print • Character print (Kanji) (B-EP4/203 dpi) • Character print (Chinese) (B-EP4/203 dpi) • Character print (Korea) (B-EP4/203 dpi) 4- 61...
  • Page 96 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print • Bar code print (Kanji) (B-EP2/203 dpi) • Bar code print (Chinese) (B-EP2/203 dpi) • Bar code print (Korea) (B-EP2/203 dpi) • Bar code print (Kanji) (B-EP4/203 dpi) 4- 62...
  • Page 97 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.6 Test Print • Bar code print (Chinese) (B-EP4/203 dpi) • Line print for assembly process (B-EP2) • Bar code print (Korea) (B-EP4/203 dpi) • Line print for assembly process (B-EP4) 4- 63...

  • Page 98: Sensor Display/Adjustment

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment 4.7 Sensor Display/Adjustment In the Sensor Adjustment mode, the status of the sensors and thermistors is displayed. Also you can store media level voltage and media end level voltage for the Black Mark and Feed Gap. 4.7.1 Sensor Display/Adjustment Operation Example <6>SENSOR ADJUST System mode menu display (Sensor Display/Adjustment)

  • Page 99: Strip Sensitivity Setting ([Peel])

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment 4.7.2 Strip Sensitivity Setting ([PEEL]) This setting is used for sensitivity adjustment of strip sensor. [PEEL.] AUTO Automatic sensitivity adjustment (Factory default) [FEED] [PEEL.] Low sensitivity [PAUSE] [PEEL.] High sensitivity Notes:...
  • Page 100 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment (5) Battery Voltage Status [BATTERY] 16.5V Battery Voltage Status B-EP2: 7.2V to 8.4 (9.4)V B-EP4D: 14.0V to 16.8 (17.4)V Note: The voltage in parenthesis indicates an upper limit which does not cause a high voltage error.

  • Page 101: Backlash Step Count Adjustment 1(Backlash1)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment 4.7.4 Backlash step Count Adjustment 1(BACKLASH1) This setting selects a backlash step count for a feed in forward direction. Setting range of backlash1 is 00 to 99. (Factory default: 01 (B-EP2), 08 (B-EP4)) BACKLASH1 [FEED]...

  • Page 102: Backlash Step Count Adjustment 1(Backlash2)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment 4.7.5 Backlash step Count Adjustment 1(BACKLASH2) This setting selects a backlash step count for a feed in reverse direction. Setting range of backlash2 is 00 to 99. (Factory default: 01 (B-EP2), 08 (B-EP4)) BACKLASH2 [FEED]...

  • Page 103: Ram Clear

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.8 RAM Clear 4.8 RAM Clear In the RAM Clear mode, clearing the Maintenance Counter and initializing the Parameters are possible. After replacing the print head, ribbon motor, or platen, perform a maintenance clear. 4.8.1 RAM Clear Operation Example System mode menu display (RAM Clear) <7>SENSOR ADJUST...

  • Page 104: Parameter Clear (Parameter Clear)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.8 RAM Clear 4.8.3 Parameter Clear (PARAMETER CLEAR) This setting is used for sensitivity adjustment of strip sensor. Depending on destination (model type), the default value of the LCD language vary. QM TYPE RAM clear for Global model [PAUSE]...
  • Page 105 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.8 RAM Clear • Value after parameter clear Parameter Value Feed amount fine adjustment (PC) +0.0mm Print tone fine adjustment (PC) +0step Strip position fine adjustment (PC) +0.0mm Feed amount fine adjustment (Key) +0.0mm Print tone fine adjustment (Key) +0step...
  • Page 106 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment Parameter Value 128KB Writable character storage area When downloading Chinese QM type 1280KB size When downloading Korea JA type When downloading Kanji 1024KB When not downloading Kanji 2304KB 320KB BASIC file storage area size...
  • Page 107 115200 USB serial number DISABLE RS-232C RS-232C baud rate 9600 RS-232C PARITY EVEN Bluetooth Bluetooth device nickname TOSHIBA TEC BT Bluetooth device address Fixed module address Inquiry scan time EVERY Inquiry/page scan interval 2048 Inquiry/page scan window Security level WLAN...

  • Page 108: Maintenance Counter Clear

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment 4.8.5 Maintenance Counter Clear * * * * FEED * * * * Clear when replacing the platen [FEED] * * * * PRINT * * * * Clear when replacing the print head [PAUSE] * * * * ALL...
  • Page 109 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment (2) Clear when replacing the print head MAINT.CNT CLEAR Maintenance Counter Clear Mode [POWER] * * * * FEED * * * * [PAUSE] Clear when replacing the print head * * * * PRINT * * * * [POWER] Start of maintenance counter clear...
  • Page 110 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment (3) All clear MAINT.CNT CLEAR Maintenance Counter Clear Mode [POWER] * * * * FEED * * * * [PAUSE] * * * * PRINT * * * * [PAUSE] All clear * * * * ALL...
  • Page 111 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.7 Sensor Display/Adjustment Print Result of Maintenance Counter Values and Various Parameter Values After Each Type of Clear Clear when replacing the platen (FEED) The total feed up to the last feed moves to FEED1 and the FEED1 value moves to FEED2. (The FEED 4 value is cleared.) Clear when replacing the print head (PRINT) The total print length up to the last print moves to PRINT1 and the PRINT1 value moves to PRINT2.

  • Page 112: Interface Setting

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting 4.9 Interface Setting This mode used for the setting of various interface of the printer. 4.9.1 Interface Setting Operation Example IrDA, USB and RS-232C model Power OFF While holding down the [FEED] key, press the [POWER] key to turn the power [FEED] and [POWER] System mode menu display (Shutdown)
  • Page 113 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (2) IrDA, Wireless LAN model (including IrDA, RS-232C and Bluetooth model) Power OFF [FEED] and [POWER] While holding down the [FEED] key, press the [POWER] key to turn the power System mode menu display (Shutdown) <0>SHUTDOWN [FEED]...
  • Page 114 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting IrDA, Wireless LAN model (including IrDA, RS-232C and Wireless LAN model.) Power OFF [FEED] and [POWER] While holding down the [FEED] key, press the [POWER] key to turn the power System mode menu display (Shutdown) <0>SHUTDOWN [FEED]...

  • Page 115: Irda Setting

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting 4.9.2 IrDA Setting (1) IrDA Communication Program Setting (PROTOCOL) This setting selects protocol of IrDA. PROTOCOL IrCOMM IrCOMM (Factory default) [FEED] PROTOCOL IrDA Disable [PAUSE] PROTOCOL TEC Protocol Notes: When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.
  • Page 116 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (3) Printer ID Setting This setting is required to identify each printer for wireless communication. PRINTER 00001 Setting of 1st digit (0 to 6) Press the [PAUSE] or [FEED] key to set the value. Press the [POWER] key to determine the value.

  • Page 117: Usb Serial Number Setting

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting 4.9.3 USB Serial Number Setting This mode is setting the USB serial number. SERIAL NUMBER USB serial number setting [POWER] Setting of 1st digit (Refer to Note 1) [PAUSE] or [FEED] Press the [PAUSE] or [FEED] key to set the value.

  • Page 118: Rs-232C Setting

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting 4.9.4 RS-232C Setting (1) RS-232C Baud Rate setting (SPEED) This parameter is to choose a baud rate of the RS-232C interface. When the printer communicates with a host computer by serial interface, be sure to match the setting with the host.

  • Page 119: Bluetooth Setting

    Notes: When set to “ON”, the device nickname is “FACTORY TEST”. When set to “OFF”, the device nickname is “TOSHIBA TEC BT”. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.
  • Page 120 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (3) Security Level Setting (SECURITY) This setting is to security level. OFF (Factory default) SECURIYU [FEED] [PAUSE] SECURIYU LINK LINK Notes: When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.
  • Page 121 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (5) Inquiry/Page Scan Window Setting (SCN WINDOW) This setting is to Inquiry/Page Scan window. SCN WINDOW [FEED] SCN WINDOW SCN WINDOW SCN WINDOW 4094 4094 SCN WINDOW 4095 4095 [PAUSE]...

  • Page 122: Wireless Lan Setting

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting 4.9.6 Wireless LAN Setting This setting is wireless LAN Interface. (1) Selection of Wireless LAN Setting Items. Wireless LAN enable/disable setting WLAN [PAUSE] PRINTER IP ADRES Printer IP address setting [PAUSE] GATEWAY IP ADRES Gateway IP address setting...
  • Page 123 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting Notes: When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system mode menu.
  • Page 124 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (3) Printer IP Address Setting (PRINTER IP ADRES) This setting is printer IP address. PRINTER IP ADRES Printer IP address setting [POWER] 1 9 2 . 1 6 8 . 2 5 4 . 2 5 4 1 9 2 First 8bits setting [PAUSE] or [FEED]...
  • Page 125 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (4) Gateway IP Address Setting (GATEWAY IP ADRES) This setting is gateway IP address. GATEWAY IP ADRES Gateway IP address setting [POWER] 1 9 2 . 0 0 0 . 0 0 0 . 0 0 0 0 0 0 First 8bits setting [PAUSE] or [FEED]...
  • Page 126 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (5) Subnet Mask Setting (SUBNET MASK) This setting is subnet mask. GATEWAY IP ADRES Subnet mask setting [POWER] 1 9 2 . 0 0 0 . 0 0 0 . 0 0 0 2 5 5 First 8bits setting [PAUSE] or [FEED]...
  • Page 127 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (6) Socket Communication Setting (SOCKET PORT) This setting is socket port. SOCKET PORT Socket port setting [POWER] PORT OFF - - - - - Socket port communication setting OFF. [PAUSE] PORT ON 0 8 0 0 0...
  • Page 128 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system mode menu.
  • Page 129 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (8) WINS Setting (WINS) This setting is WINS. WINS WINS setting [POWER] WINS setting is disabled. (Factory default) WINS [PAUSE] WINS WINS setting is enabled. [PAUSE] WINS DHCP DHCP is enabled.
  • Page 130 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (9) WINS Address Setting (WINS ADDRESS) This setting is WINS address. WINS ADDRESS WINS address setting [POWER] 1 9 2 . 0 0 0 . 0 0 0 . 0 0 0 0 0 0 First 8bits setting [PAUSE] or [FEED]...
  • Page 131 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (10) LPR Setting (LPR) This setting is LPR. LPR setting [POWER] Disabled (Factory default) [PAUSE] Enabled [PAUSE] Notes: When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.
  • Page 132 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (12) Overview of Wireless LAN Authentication Setting Encryption Wireless LAN setting connection mode (ENCRYPT) (WLAN MODE) ADHOC WEP40 Connection type INFRA WEP104 (WEP/WPA) OPEN WEP40 SHARED WEP104 802.1X 802.1X authentication type...
  • Page 133 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (14) ADHOC Encryption Setting (ENCRYPTION) This setting is Encryption of Adhoc mode. CONN MODE ADHOC Adhoc mode encryption setting [POWER] ENCRYPT Encryption is disabled. [PAUSE] ENCRYPT WEP40 Encryption is enabled.
  • Page 134 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (15) INFRA WEP/WPA Connection Type Setting (WEP/WPA) This setting is Encryption of Infrastructure mode. CONN MODE INFRA Infrastructure mode encryption setting [POWER] WEP/WPA OPEN Open (Factory default) [PAUSE] WEP/WPA SHARED...
  • Page 135 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (16) 802.1x, WPA, WPA2 Connection Type Setting (AUTH) When “802.1x” is selected: AUTO OPEN SYATEM Selected to open system (Factory default) [PAUSE] AUTO SHARED KEY Selected to shared key [PAUSE] Notes: When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]...
  • Page 136 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting When “WPA” or “WPA2” is selected for WEP/WPA: SETTING EAP-TLS EAP-TLS (Factory default) [PAUSE] SETTING EAP-TTLS EAP-TTLS [PAUSE] SETTING LEAP LEAP [PAUSE] SETTING PEAP PEAP [PAUSE] SETTING EAP-FAST EAP-FAST [PAUSE]...
  • Page 137 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (18) INFRA Encryption Setting (ENCRYPT) When “OPEN” is selected: ENCRYPT Encryption is disabled (Factory default) [PAUSE] ENCRYPT WEP40 Encryption is enabled. (WEP64(40)) [PAUSE] ENCRYPT WEP104 Encryption is enabled. (WEP128(104)) [PAUSE] When “SHARED KEY”...
  • Page 138 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (19) Default Key Setting (DEFAULT KEY) DEFAULT KEY Default Key setting [POWER] DEFAULT KEY Selected to Key 1 (Factory default) [PAUSE] DEFAULT KEY Selected to Key 2 [PAUSE] DEFAULT KEY Selected to Key 3...
  • Page 139 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (20) 802.11b Channel Setting (802.11b CHANNEL) 802.11b CHANNEL IEEE802.1b channel setting [POWER] 802.11b CHANNEL 1 Selected to channel 1 (Factory default) [PAUSE] 802.11b CHANNEL 2 Selected to channel 2 [PAUSE] 802.11b CHANNEL 3 Selected to channel 3...
  • Page 140 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting Usable Channel List by Countries Country code Country Usable Channel Japan 1-14 1-11 Canada 1-11 Australia 1-13 New Zealand 1-13 Mexico 1-11 South Africa 1-13 China 1-13 Hong Kong 1-13 Taiwan...
  • Page 141 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (21) 802.11b Baud Rate Setting (802.11b BAUD) 802.11b BAUD IEEE802.11b baud rate setting [POWER] BAUD RATE Selected to 11Mbps (Factory default) [PAUSE] BAUD RATE 5.5M Selected to 5.5Mbps [PAUSE] BAUD RATE Selected to 2Mbps...
  • Page 142 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (22) 802.11g Channel Setting (802.11g CHANNEL) 802.11b CHANNEL IEEE802.1b channel setting [POWER] 802.11g CHANNEL 1 Selected to channel 1 (Factory default) [PAUSE] 802.11g CHANNEL 2 Selected to channel 2 [PAUSE] 802.11g CHANNEL 3 Selected to channel 3...
  • Page 143 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting Usable Channel List by Countries Country code Country Usable Channel Japan 1-13 1-11 Canada 1-11 Australia 1-13 New Zealand 1-13 Mexico 1-11 South Africa 1-13 China 1-13 Hong Kong 1-13 Taiwan...
  • Page 144 4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.9 Interface Setting (23) 802.11g Baud Rate Setting (802.11g CHANNEL) 802.11g BAUD IEEE802.11g baud rate setting [POWER] BAUD RATE Selected to 54Mbps (Factory default) [PAUSE] BAUD RATE Selected to 48Mbps [PAUSE] BAUD RATE Selected to 36Mbps...

  • Page 145: Basic Setting

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.10 BASIC Setting 4.10 BASIC Setting The Basic function enables the printer to operate with the program created for other printers, by converting it to Basic program and downloading this Basic program to the printer. Setting the downloaded Basic program to be enabled/disabled, browsing the program file, data file, and area file, etc.

  • Page 146: Basic Interpreter Setting (Basic Enable)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.10 BASIC Setting Note: When the BASIC setting is ON, the issue mode automatically changes to TPCL mode, and afterwards, the issue mode does not change even when the BASIC setting is set to OFF. To select other mode, change the mode following the Mode setting procedure.

  • Page 147: Basic File Browser (File Maintenance)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.10 BASIC Setting 4.10.3 BASIC File Browser (FILE MAINTENANCE) This function displays data stored in the BASIC file storage area (00 to 13). The number of data that can be displayed differs depending on the BASIC file storage area allocated. - - - - - - - [PAUSE] - - - - - - -...

  • Page 148: Basic Trace Setting (Basic Trace)

    4. SYSTEM MODE (For Service Persons and System Administrators) EO13-33005 4.10 BASIC Setting 4.10.4 BASIC Trace Setting (BASIC TRACE) TRACE Disabled (Factory default) [PAUSE] TRACE Enabled [PAUSE] Notes: When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE] key is pressed.

  • Page 149: System Mode (For Users, Available Menu Items Are Limited.)

    5. SYSTEM MODE (For users, availbale menu items are limited) EO13-33005 5.1 Flowchart of System Mode (For users) SYSTEM MODE (For users, available menu items are limited.) This mode is a System mode for end users. Setting items are limited to this mode. For details of each setting item, please refer to Section 4.

  • Page 150: Lcd Display At Starkup

    5. SYSTEM MODE (For users, availbale menu items are limited) EO13-33005 5.2 LCD Display at Startup LCD Display at Starkup Power OFF While holding down the [FEED] key, press the [POWER] key to [PAUSE] and [POWER] turn the power on. Startup of IPL J 1 0 A 1 0 B 1 0 C 1 0 1 0 D HTML Version Information...

  • Page 151: Flowchart Of Self Test

    5. SYSTEM MODE (For users, availbale menu items are limited) EO13-33005 5.3 Flowchart of Self Test Flowchart of Self Test <1>DIAGNOSTIC [POWER] Check & Print (Maintenance Counter) [POWER] MAINTENANCE CONT Refer to Section 4.2. [FEED] [PAUSE] Chack & Print (Diagnostic Print) AUTO DIAGNOSTIC [POWER] Refer to Section 4.2.

  • Page 152: Flowchart Of Printer Parameter Fine Adjustment Setting

    5. SYSTEM MODE (For users, availbale menu items are limited) EO13-33005 5.5 Flowchart of Printer Parameter Fine Adjustment Setting Flowchart of Printer Parameter Fine Adjustment Setting <3>ADJUST SET [POWER] Feed amount fine adjustment FEED ADJ. +0.0mm Refer to Section 4.5 [POWER] X-coordinate fine adjustment X ADJUST...

  • Page 153: Flowchart Of Test Print

    5. SYSTEM MODE (For users, availbale menu items are limited) EO13-33005 5.6 Flowchart of Test Print Flowchart of Test Print (1) Normal test print <4>TEST PRINT [POWER] Test print condition parameter setting mode PRINT CONDITION Refer to Section 4.6 [PAUSE] 1-dot slant line print mode SLANT LINE(1DOT) Refer to Section 4.6...

  • Page 154: Operation During Battery Charge By Ac Power Supply

    6. OPERATINI DURING BATTERY CHARGE BY AC POWER SUPPLY EO13-33005 6.1 IN PRINTER POWER OFF STATE OPERATION DURING BATTERY CHARGE BY AC POWER SUPPLY This section describes the printer operations while the battery is being charged by the AC adapter. IN PRINTER POWER OFF STATE (1) The AC adapter is connected: LCD:...

  • Page 155: Program Down Load Mode

    7. PROGRAM DOWNLOAD MODE EO13-33005 7.1 General Description PROGRAM DOWN LOAD MODE This section provides step-by-step instructions on how to setup and download the firmware to the B-EP series portable printer. The firmware download will be made from a PC via the USB interface and IrDA interface of the printer.

  • Page 156: Setup

    7. PROGRAM DOWNLOAD MODE EO13-33005 7.2 Software Installation Note: (1) Windows is a registered trademark of Microsoft Corporation in the United States and other countries. (2) A USB cable is cautious of the form of a connector. (3) The interface jig implement by IrDA (TEC) is limited to this product. (4) The interface jig implement by IrDA (IrCOMM) is an example of reference, and other interface jig implements may be used for it.

  • Page 157: Starting Up And Exiting The Download Program For B-Ep

    Starting Up The Download Program For B-EP (1) Click on the [Start] button on the Windows task bar. (2) Choose the [All Programs], [TOSHIBA TEC], [B-EP], [DWNLD], and [Download Program for B-EP], in order. (3) The download program starts up, then the following screen is displayed.

  • Page 158: Transmission Conditions Settings

    7. PROGRAM DOWNLOAD MODE EO13-33005 7.4 Transmission Conditions Settings 7.4 Transmission Conditions Settings This section describes how to set the transmission conditions for downloading, such as, interface type, device, baud rate, parity, and download mode. 7.4.1 Transmission Conditions (1) Choose the [Condition(C)] from the [tool(T)] drop down menu. (2) Set the Device, Interface, as follows.

  • Page 159: Downloading The Firmware To The Printer

    7. PROGRAM DOWNLOAD MODE EO13-33005 7.5 Downloading The Firmware to The Printer 7.5 Downloading The Firmware To The Printer 7.5.1 Selecting The Firmware (1) Click on the [File(F)] menu and choose the [Open(O)]. (2) Choose the file to be downloaded (*.BIN) from the firmware file directory (folder), and click on the [Open] button.

  • Page 160: Downloading The Firmware

    7. PROGRAM DOWNLOAD MODE EO13-33005 7.6 Downloading The Firmware 7.6 Downloading The Firmware 7.6.1 Preparation of Printer When downloading, you have to set a printer as a download mode. The procedure for setting it in a download mode (1) Turn OFF the power supply of a printer. (2) Where the FEED key and the PAUSE key are pressed, carry out the depression of the POWER key.
  • Page 161 7. PROGRAM DOWNLOAD MODE EO13-33005 7.6 Downloading The Firmware (4) During data transmission, the screen below appears with a progress indicator at the bottom. When the downloading has been successfully completed, the message below appears NOTES: When any other devices are connected to the PC’s USB ports, the print test may not be able to be performed.

  • Page 162: Download By Irda(Tec)

    7. PROGRAM DOWNLOAD MODE EO13-33005 7.6 Downloading The Firmware 7.6.3 Download by IrDA(TEC) (1) Hold the ACTISYS tool in front of the printer so that its IrDA interface window faces. (2) Choose the [Start(S)] from the [Transmission(R)] drop down menu to start downloading. (3) Choose the [Start(S)] from the [Transmission(R)] drop down menu to start downloading.

  • Page 163: Download By Irda(Ircomm)

    7. OPERATINI DURING BATTERY CHARGE BY AC POWER SUPPLY EO13-33005 7.6 Downloading The Firmware 7.6.4 Download by IrDA(IrCOMM) (1) Hold the ACTISYS tool in front of the printer so that its IrDA interface window faces. (2) Choose the [Start(S)] from the [Transmission(R)] drop down menu to start downloading. (3) During data transmission, anticipation end time is displayed with the bottom of the below screen.

This manual is also suitable for:

B-ep4dl series

Table of Contents