Toshiba B-EP Series Interface Specification page 415

6.5.4 BARCODE FORMAT COMMAND
Function Sets the format to indicate the position on the label, at which the barcode is to be
printed and how it is to be printed.
Format [ESC] XBaa; bbbb, cccc, d, e, ff, gg, hh, ii, jj, k, llll, m, nn, o, p [LF] [NUL]
Term aa:
bbbb: Print origin of X-coordinate of barcode
cccc:
d:
e:
ff:
gg:
hh:
ii:
jj:
k:
llll:
m:
(MSI, ITF, CODE39, NW7)
Barcode No.
00 to 99
(The same No. must not be used in one form for the bit map font field, the
outline font field, and the barcode field.)
Fixed at 4 digits (in 0.1 mm units)
Print origin of Y-coordinate of barcode
Fixed at 4 digits (in 0.1 mm units)
Type of barcode
1: MSI
2: Interleaved 2 of 5 (ITF)
3: CODE39 (Standard)
4: NW7
Type of check digit
1 (Fixed value): Without attaching check digit
Narrow bar width
02 to 03: 2 to 3 dots
Narrow space width
02 to 03: 2 to 3 dots
Wide bar width
05 to 09: 5 to 9 dots
Wide space width
05 to 09: 5 to 9 dots
Character-to-character space width
02 to 03: 2 to 3 dots
* Only for MSI and ITF, "00" can be set. If any value is set, the printer
automatically changes it to "00."
Rotational angle of barcode
0: 0°
1: 90°
2: 180°
3: 270°
Height of barcode
0001 to 0350 (in 0.1 mm units)
Selection to print numerals under bars
0: Non-print
1: Print
CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
[ESC] XB
6-34
B-EP Series