Toshiba B-EP Series Interface Specification page 481

7.5 COMMANDS RELATED TO DRAWING FORMAT
7.5.1 LINE FORMAT COMMAND
Function Specifies the line format and draws it.
Format [ESC] Labbb
[ESC] Lcddeeee
Term a:
bbb:
c:
dd:
eeee: No. of line length dots
Explanation (1) The print position of the line is shown below:
Initial value: 000 dot
Left margin: 100 dots
Offset: 100 dots,
Alignment: Center
Alignment: Right
Left margin: 0 dot,
Alignment: Left
Line width
1 to 9 (in units of dots)
Line length
001 to 999 (in units of dots)
Expansion parameter
e (Command parameter expansion designated)
No. of line width dots
01 to 99 (in units of dots)
Note that any value of 9 or more is corrected to 9.
0001 to 1296 (in units of dots)
ABC
Line DEF
100
ABC
100
456
Effective print width (Width of head)
CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
Paper feed direction
4 9 4 0 0 4 5 8
ABC
123
Width of receipt
7-12
[ESC] L
[Enlarged view]
100 dots
ABC [LF]
DEF [ESC] L3100 [LF]
[ESC] H100 ABC [LF]
[GS] k04940045 [NUL] [LF]
[ESC] C +100 [ESC] a1 ABC [LF]
[ESC] a2 123 [LF]
[ESC] H000 [ESC] a0 456 [LF]
B-EP Series
3 dots