Toshiba B-EP Series Interface Specification page 291

Explanation
(1) Two-dimensional code number
When drawing by the Data Command ([ESC] RB), the format designated by the two-
dimensional code number is selected.
(2) Print origin of coordinates
Origin of
coordinates
(0, 0)
Effective
print
length
X
0
print width
Y
[Printing direction: Bottom first]
The print origin of coordinates must be set so that the two-dimensional code drawing
result will be within the effective print area set by the Label Size Set Command ([ESC] D).
(3) Type of two-dimensional code
X: MicroPDF417
(4) Security level
The MicroPDF417 contains a function to correct a code reading error using an error
correcting code word and restore normal data.
security level.
Backing paper
Label
Print origin of
coordinates
Effective
Paper feed direction
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
Effective
print
length
Y
0
X
[Printing direction: Top first]
The printer automatically sets the
5-121
B-EP Series
Backing paper
Label
Print origin of
coordinates
Origin of
Effective
coordinates
print width
Paper feed direction
(0, 0)