Toshiba B-EP Series Interface Specification page 566

8.10.24 PAGE MODE PRINT DIRECTION SET COMMAND
Function Selects a print direction and print starting point in page mode.
Format [ESC] Tn
Term ASCII: ESC T
Hex: 1Bh 54h
[Parameter]
n: Selecting print direction and starting point
N
0, 48
1, 49
2, 50
3, 51
Default value n: 0
Explanation (1) If this command is received while the printer is in standard mode, the defined
parameter setting will be applied after switching to page mode.
(2) The position where characters are expanded is the starting position in the print area
defined by the Page Mode Print Area Set Command ([ESC] W).
Reference Switching to Standard Mode Command ([ESC] S)
Switching to Page Mode Command ([ESC] L)
Page Mode Print Area Set Command ([ESC] W)
Relative Position Set Command ([ESC] \)
Page Mode Relative Position in Vertical Direction Set Command ([GS] \)
Print direction
Top left (A in the
Left → Right
figure on the right)
Bottom left (B in the
Bottom → Top
figure on the right)
Bottom right (C in
Right → Left
the figure on the
right)
Top right (D in the
Top → Bottom
figure on the right)
CHAPTER 8 ESC/POS MODE (INTERFACE COMMANDS)
[ESC] T
0 ≤ n ≤ 3 (00h ≤ n ≤ 03h)
48 ≤ n ≤ 51 (30h ≤ n ≤ 33h)
(Reference)
8-39
B-EP Series
(Print area)