Toshiba B-EP Series Interface Specification page 234

Notes
(1) The check digit attachment, increment/decrement and zero suppression are performed
according to the following priority. If any of the conditions is improper, no drawing will
take place.
For example, the zero(s) is replaced by a space(s) as a result of zero suppression, but
the modulus 10 designated to be attached cannot be calculated.
Increment/decrement > zero suppression > attachment of check digit
(2) Up to 32 fields for which increment/decrement has been designated can be drawn. If the
total bit map font, outline font and barcode increment/decrement fields exceeds 32,
drawing will take place without incrementing/decrementing any excessive field. The field
to be incremented or decremented is incremented or decremented until the Image Buffer
Clear Command ([ESC] C) is transmitted.
[Examples]
1) Format Command (Incrementing character string No. 01 (+1))
2) Format Command (No incrementing character string No. 02)
3) Format Command (Incrementing character string No. 03 (+2))
4) Image Buffer Clear Command
5) Data Command (Character string No. 01 "0001")
6) Data Command (Character string No. 02 "AB-")
7) Data Command (Character string No. 03 "0100")
8) Issue Command (2 labels)
0001
AB-0100
0002
AB-0102
9) Issue Command (1 label)
0003
AB-0104
10) Image Buffer Clear Command
11) Data Command (Character string No. 02 "00000")
12) Issue Command (1 label)
00000
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
5-64
B-EP Series