Toshiba B-EP Series Interface Specification page 673

TPCL mode
[Information field to be sent when IrDA: TEC Protocol is used]
STX Sec Inq
02H 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH
Security setting
1 (31H): No security
2 (32H): No security
3 (33H): Link level security is effective
Bluetooth device name
Bluetooth device name: Fixed at 32 bytes.
When the Bluetooth device name is "TOSHIBA TEC BT."
[54H] [4FH] [53H] [48H] [49H] [42H] [41H] [20H] [54H] [45H] [43H] [20H] [42H] [54H] [00H] [00H]
T O S H
[00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H] [00H]
* When the Bluetooth device name is less than 32 bytes, the remaining bytes are filled
with 00H.
[Information field to be sent when IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, or
Bluetoothis used]
SOH STX Sec
01H 02H 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH 3xH
Bluetooth device name
CHAPTER 10 SYSTEM MODE (INTERFACE COMMANDS)
Interval
Inquiry/page interval
0018 to 4096
Inquiry timer
0 (30H): Inquiry is not possible.
1 (31H): Inquiry is possible only within 60 seconds after a
printer power on
2 (32H): Inquiry is possible at anytime.
32 bytes
I B A ' ' T
Inq Interval
32 bytes
10-34
Window
Inquiry/page window
0018 to 4096
CRC CRC
xxH xxH
E C ' ' B
Window
ETX EOT CR LF
03H 04H 0DH 0AH
B-EP Series
T