Interface Setting; Interface Setting Operation Example; Irda Setting - Toshiba B-EP Series Key Operation Specification

5.18 INTERFACE SETTING

5.18.1 Interface Setting Operation Example

O N L I N E
P A U S E
< 1 > R E S E T
< 2 > M O D E
< 3 > P A R A M E T E R
< 4 > A D J U S T
< 5 > D U M P
< 6 > E X P A N D
< 7 > I / F
< I r D A >
< U S B >
Power ON
[PAUSE]
[PAUSE]
[PAUSE]
S E T T I N G
[PAUSE]
S E T
[PAUSE]
S E T
[PAUSE]
M O D E
[PAUSE]
M O D E
[PAUSE]
S E T T I N G
[POWER]
[PAUSE]
[PAUSE]
(1) Idling or printing normally
(2) Press the [PAUSE] key.
(3) "PAUSE" is displayed.
(4) Hold down the [PAUSE] key for 3 seconds or
more while the printer is in a pause state.
(5) The reset menu is displayed.
(6) Press the [PAUSE] key.
(7) System mode menu display (Mode setting)
(8) Press the [PAUSE] key.
(9) System mode menu display
(Parameter setting)
(10) Press the [PAUSE] key.
(11) System mode menu display
(Fine adjustment value setting)
(12) Press the [PAUSE] key.
(13) System mode menu display
(Receive buffer dumping menu)
(14) Press the [PAUSE] key.
(15) System mode menu display
(BASIC expansion mode)
(16) Press the [PAUSE] key.
(17) System mode menu display (Interface setting)
(18) Press the [POWER] key.

(19) IrDA setting

(20) Press the [PAUSE] key.
(21) USB setting
(22) Press the [PAUSE] key.
- 28 -