Toshiba B-EP Series Interface Specification page 411

When one field width < specified character string width
(Space between characters < 0, Specified character string digits = 8)
Print image when the parameter setting is omitted.
1 field width (125 dots)
A B C D
Specified character string width (200 dots)
Corrected space between characters=((Specified character string digits – data
length(x0.5+1) x Space between characters=-15 dots
A=Specified character
length+(corrected space between characters x (Data length – 1))=200 dots – 95
dots = 105 dots
B=A/Data length=105 dots/4≈26 dots (rounded down)
One character width=1 character width+B=35 dots+26 dots=61 dots
Print image when the parameter setting is specified.
Space between characters (-15 dots)
A
Specified character string width (199 dots)
* When the number of print data is 8 digits or more, the condition of
ineffectiveness (3) is satisfied. In this case, the characters are printed in
normal width.
CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
A
One character width (35 dots)
Space between characters (-5 dots)
string width –
One character width (61 dots)
B C
6-30
(1 character width
D
B-EP Series
x Data