Toshiba B-EP Series Interface Specification page 473

7.3 COMMANDS RELATED TO SETTING
7.3.1 MODE SELECT COMMAND
Function Changes the print mode.
Format [ESC] M; a(,b) [LF] [NUL]
Term a:
b:
Explanation (1) There are 4 types of the print mode: "LABEL", "RECEIPT," "TPCL" and
(2) "Automatic status response in IrDA: IrCOMM or USB" is the function for the
Print mode designation
7 6 5 4 3
* Table 1 Print mode
HEX Mode
30H LABEL
31H RECEIPT
32H RECEIPT1 Continues printing
34H ESC/POS
41H TPCL
42H TPCL1
Print position detection feed (Omissible. If omitted, the print position detection
feed is not performed.)
0: When the mode change from RECEIPT, RECEIPT1 or ESC/POS to LABEL,
TPCL or TPCL1 is requested, a print position detection feed is not performed
after the mode is changed.
1: When the mode change from RECEIPT, RECEIPT1 or ESC/POS to LABEL,
TPCL or TPCL1 is requested, a print position detection feed is performed after
the mode is changed.
"ESC/POS."
specifications which do not allow the printer to spontaneously send the status
through IrDA; IrCOMM or USB. This function enables the printer to forcefully send
the status to the host, if the link between the printer and the host is established.
However, if the link between the printer and the host is not established upon the
status transmission, the printer cannot send the status. Therefore, the status is
discarded. (In the next connection to the host, the printer does not send the
status to the host.)
CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
2 1 0
Print mode (Bit 0 to Bit 6 * See Table 1.)
Automatic status response in IrDA: IrCOMM or USB
0: Not performed
1: Performed
How to deal with the received data after an error is cleared
Discards
Discards
Continues printing
Continues printing
Continues printing
7-4
[ESC] M
B-EP Series