Toshiba B-EP Series Interface Specification page 517

7.10.3 MODE INFORMATION ACQUIRE COMMAND
Function Sends the printer mode information to the host.
Format [ESC] WX [LF] [NUL]
Explanation (1) The mode information format to be sent to the host, is as follows:
RECEIPT mode (Mode = 1)
[IrDA: TEC Protocol]
STX
02H 52H 45H 43H 45H 49H 50H 54H 20H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
STX
02H 52H 45H 43H 45H 49H 50H 54H 20H 20H 20H 20H 20H 20H 20H 20H 20H
RECEIPT1 mode (Mode = 2)
[IrDA: TEC Protocol]
STX
02H 52H 45H 43H 45H 49H 50H 54H 31H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
STX
02H 52H 45H 43H 45H 49H 50H 54H 31H 20H 20H 20H 20H 20H 20H 20H 20H
The above shows examples where the message is received in the RECEIPT mode
(Mode = 1) and the RECEIPT1 mode (Mode = 2). In addition, the messages described
on the following page are returned.
R E C E I P
R E C E I P
R E C E I P
R E C E I P
CHAPTER 7 RECEIPT MODE (INTERFACE COMMANDS)
Mode information (16 bytes)
T SP SP SP SP
Mode information (16 bytes)
T SP SP SP SP
Mode information (16 bytes)
T 1 SP SP SP
Mode information (16 bytes)
T 1 SP SP SP
7-48
[ESC] WX
SP SP SP SP SP
SP SP SP SP SP
SP SP SP SP SP
SP SP SP SP SP
B-EP Series
CRC CRC
CRC CRC