Toshiba B-EP Series Interface Specification page 412

When one field width ≥ specified character string width
(Space between characters ≥ 0, Specified character string digits = 6)
Print image when the parameter setting is omitted.
One character width (50dots)
A
Specified character string width (120 dots)
A=1 field width – Specified character string width=215 dots – 120 dots=95 dots
B=A/Data length=95 dots/4≈24 dots (rounded up)
One character width=1 character width – B=50 dots – 24 dots=26 dots
Print image when the parameter setting is specified.
Space between characters (5 dots)
A B C
Specified character string width (120 dots)
* When the number of print data is 6 digits or more, the condition of
ineffectiveness (3) is satisfied. In this case, the characters are printed in
normal width.
CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
1 field width (215 dots)
B C
D
One character width (26 dots)
6-31
Space between characters (5 dots)
D
A
B-EP Series