Toshiba B-EP Series Interface Specification page 339

5.8.3 STORAGE AREA ALLOCATE COMMAND
Function Allocates the storage area in the flash ROM on the CPU board.
Format [ESC] XF; aa, bb, cc (, dd, ee) [LF] [NUL]
Term aa:
bb:
cc:
dd:
ee:
Explanation
(1) The total capacity of the storage area in flash ROM is variable from 1,024 to 3,200 KB.
* Variable with the two-byte font installed
(2) Allocation priority is assigned as follows:
(3) When the above command is received, the entire area in flash ROM on the CPU board is
cleared. However, omitted parameters are not cleared.
Reserved
00 to 14
Size of bit map writable character storage area
00 to 50 (0 KB to 3,200 KB)
Size of BASIC file storage area
00 to 14 (0 KB to 896 KB)
AA: The current BASIC file storage area and contents are retained.
Size of form storage area
(Omissible. If omitted, the contents are retained.)
00 to 14 (0 KB to 896 KB)
Size of graphic storage area
(Omissible. If omitted, the contents are retained.)
00 to 03 (0 KB to 192 KB)
Kanji
Chinese
Korean
Without the two-byte font installed
All parameters
Writable character > BASIC > Form > Graphic > PC save
Omissible parameters (, dd, ee) are omitted
Form > Graphic > Writable character > BASIC > PC save
BASIC is retained (AA)
BASIC > Writable character > Form > Graphic > PC save
BASIC is retained, or omissible parameters are omitted
Form > Graphic > BASIC > Writable character > PC save
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
[ESC] XF
(in units of 64 KB)
(in units of 64 KB)
(in units of 64 KB)
(in units of 64 KB)
1,344 KB
1,024 KB
2,112 KB
3,200 KB
5-169
B-EP Series