Toshiba B-EP Series Interface Specification page 402

Explanation (1) Character string No.
The data in the Data Print Command (X) is selected and linked in the order of this
character string No. (The format of character string Nos. 00 and 01 is linked to
the first and second data, respectively. In the same order, the format is linked to
the data.) Therefore, the Nos. of the bit map font character string, the outline
font character string, and the barcode/two-dimensional code, should be
consecutive, starting from 00 (in ascending order). The same No. must not be
used in one form for the bit map font character string field, the outline font
character string field, and the barcode/two-dimensional code field.
(2) Print origin of coordinates
0
Y
Origin of
coordinates
Effective
print length
(3) Horizontal magnification and vertical magnification
NOTE:
Paper feed direction
X
(0, 0)
Sample
Print origin of
coordinates
Effective print width
Horizontal mag.: 1
Vertical mag.: 1
Vertical
magnification
Horizontal
magnification
When a large character or many characters is/are printed, the print
density may become lower. (When the print ratio per line is high, the
print density may become lower.)
CHAPTER 6 LABEL MODE (INTERFACE COMMANDS)
Backing paper
Label
Horizontal mag.: 1
Vertical mag.: 2
6-21
B-EP Series
Horizontal mag.: 2
Vertical mag.: 1
Horizontal mag.: 2
Vertical mag.: 2