Toshiba B-EP Series Interface Specification page 140

(2) When interrupting communication with the 2nd label command separator, and then
transmitting subsequent data,
1st transmission:
[1B]XO;01,1[0A][00]
[1B]AY;+00,1[0A][00]
[1B]AX;+000[0A][00]
[1B]D0450,0480,0420[0A][00]
[1B]LC;0050,0030,0250,0030,1,1[0A][00]
[1B]LC;0050,0060,0250,0060,1,2[0A][00]
[1B]LC;0050,0090,0250,0090,1,3[0A][00]
[1B]LC;0050,0120,0250,0120,1,4[0A][00]
[1B]LC;0050,0150,0250,0150,1,5[0A][00]
[1B]XP[0A][00]
[1B]X[01][21][01][00]
[1B]XO;01,1[0A][00]
[1B]AY;+00,1[0A][00]
[1B]AX;+000[0A][00]
[1B]D0450,0480,0420[0A][00]
[1B]LC;0050,0030,0250,0030,1,1[0A][00]
[1B]LC;0050,0060,0250,0060,
Interrupts communication with the
command separator.
2nd transmission:
1,2[0A][00]
[1B]LC;0050,0090,0250,0090,1,3[0A][00]
[1B]LC;0050,0120,0250,0120,1,4[0A][00]
[1B]LC;0050,0150,0250,0150,1,5[0A][00]
[1B]XP[0A][00]
[1B]X[01][21][01][00]
Storage result: The 1st label data is printed after the 1st transmission, and the 2nd label data is
printed after the 2nd transmission.
Transmits subsequent
data.
4-30
CHAPTER 4 TRANSMISSION SEQUENCE
1st label data
2nd label data (underway)
2nd label data
B-EP Series