Toshiba B-EP Series Interface Specification page 374

5.15.3 MODE INFORMATION ACQUIRE COMMAND
Function Sends the printer mode information to the host.
Format [ESC] WX [LF] [NUL]
Explanation
(1) The status when the compatible mode for the B-SP series is on differs from the status
when the compatible mode is off.
(2) The mode information format to be sent to the host, is as follows:
• When the compatible mode for the B-SP series is off.
TPCL mode (Mode = A)
Batch issue mode
[IrDA: TEC Protocol]
STX
T P C
02H 54H 50H 43H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
SOH STX
T P
01H 02H 54H 50H 43H 4CH 20H 20H 20H 20H 20H 20H 20H 20H 20H 03H 04H 0DH 0AH
Strip issue mode
[IrDA: TEC Protocol]
STX
T P C
02H 54H 50H 43H 4CH 20H 28H 53H 29H 20H 20H 20H 20H 20H xxH xxH
[IrDA: IrCOMM, IrDA: IrOBEX, USB, RS-232C, Bluetooth, Wireless LAN]
SOH STX
T P
01H 02H 54H 50H 43H 4CH 20H 28H 53H 29H 20H 20H 20H 20H 20H 03H 04H 0DH 0AH
Mode information (16 bytes)
L SP SP SP SP
Mode information (16 bytes)
C L SP SP SP
Mode information (16 bytes)
L SP ( S )
Mode information (16 bytes)
C L SP ( S
CHAPTER 5 TPCL-LE MODE (INTERFACE COMMANDS)
SP SP SP SP SP
SP SP SP SP SP
SP SP SP SP SP
) SP SP SP SP
5-204
[ESC] WX
CRC CRC
ETX EOT CR LF
SP
CRC CRC
ETX EOT CR LF
SP
B-EP Series