Table of Contents
Advertisement
Volume
Ringing tone
You can set the volume of the ringing tone when the
machine is in standby mode or is actually ringing.
1 Press u. You will see the current setting
displayed for approximately 3 seconds and hear
the volume.
2 To change the value, press u until the desired
volume is reached.
v If the volume level is set to zero, no ringing tone
will be heard but faxes will still be automatically
received.
Loudspeaker
1 Press l to set the loudspeaker volume.
2 Set the volume using u.
3 Exit using l or STOP.
Key tones
1 Press MENU and 22. The display shows
BEEPER VOL.
2 Press START/COPY. Use u to select the
volume of the key tones.
3 To confirm the entry press START/COPY and then
STOP twice.
Energy save mode
Energy save mode reduces the energy consumption in
standby mode. You can select how many minutes after
the last entry before energy save mode is activated.
1 Press MENU and 335. The display shows SAVE
MODE.
2 Press START/COPY. Use u to select POWER
SAVE.
3 Press START/COPY. Use u to select 5, 15,
30, 60 minutes or OFF.
4 To confirm the entry press START/COPY and then
STOP three times.
Toner save mode
The toner save mode decreases the consumption of
the toner. Printing quality may fall off.
1 Press MENU and 335. The display shows SAVE
MODE.
2 Press START/COPY. Use u to select TONER
SAVE.
3 Press START/COPY. Use u to select ON or OFF.
4 To confirm the entry press START/COPY and then
STOP three times.
List of settings
You can print out a list of all functions and settings
currently available.
1 Press MENU, 666 and START/COPY.
2 A list of all settings is printed.
13
Advertisement
Table of Contents
