Table of Contents
Advertisement
Error Messages
Warning Messages
Selected file is incompatible The file being loaded cannot be
translated into the 16517/18A.
Time correlation of data is not possible. Before time correlation of
data is possible, time tags must be placed on the data. If you want time
correlated data, set the Count field in the Trigger menu to Time.
Unable to Detect WRAP Flag. Possible Board Fault. The WRAP
flag is not being set, which could indicate a memory problem. Run the
self tests to verify performance.
Warning Messages
Cannot read unrecognized data. The logic analysis system is trying
to translate a SPA configuration from a foreign module.
Changes to Sequence and Terms Since "Break Down" Will Be Lost!
The user has selected Restore Macros from Modify Trigger. If the user
chooses to proceed, any changes made in the macros will be lost.
Clock pod and least significant pods have been preserved. User is
loading a configuration with number of pods greater than the current
system's number of pods.
Clock Qualifiers not fully restored. The user is trying to translate a
configuration that has clock qualifiers. The 16517/18A cannot implement
clock qualifiers.
Compare not available - Insufficient Memory. There is not enough
memory available to store a compare image.
Computing chart information. Please Wait. This message is
displayed when the analyzer is busy computing the data to be charted.
When the computing is finished, the new chart will be displayed.
Delay set to limit. The Delay field is set to its limit.
Demultiplexed clocking cannot be translated. The 16517/18A is
trying to load a configuration that has demultiplexed or mixed clocks.
Error loading DISPLAY1. User is loading a configuration with a
corrupt DISPLAY1 section.
Error not found. The Find Error number specified could not be found.
11–4
Advertisement
Table of Contents
