Turning The Analyzer Off; Sample Period (Timing Only) - Agilent Technologies 16712A Help Manual

Chapter 1: Agilent Technologies 16712A 128K Sample Logic Analyzer
The Sampling Tab

Turning the Analyzer Off

The On and Off checkboxes under the Sampling tab are a shortcut for
activating and de-activating the analyzer.
Analyzers come up in the On state. If you select the checkbox, the
label changes to Off and the Analyzer Shutdown Options dialog
appears.
Soft
"Soft" shutdowns have the same effect as though you selected Off in
the Type control of the Pod Assignment dialog under Format. The
analyzer window remains, but most options are unavailable. Soft
shutdowns are easily reversed by selecting the box next to Off.
Hard
"Hard" shutdowns have the same effect as deleting the analyzer icon
from the workspace. The analyzer window and the windows of its
display tools are closed, and the analyzer is removed from the
workspace. To turn the analyzer back on, select the analyzer icon in the
System window. You will need to restore any complex analysis or
display tools.

Sample Period (Timing Only)

Sample Period is used to set the time between data samples. The
inverse of sample period is sample rate. Every time a new sample is
taken, the analyzer will see updated measurement data. The choices
available for sample period depend on the acquisition mode.
If your analyzer is set to timing, the Sample Period control is located
under the Sampling tab's Timing Mode Controls and under the Trigger
tab's Settings sub-tab.
If your analyzer is set to state, the Sample Period control is not
available. Its functionality is handled by the Clock Setup.
46
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com