Adding A Rogue's Clients To The Black List; Configuring Rf Detection Options From The Organizer Panel - 3Com WX1200 Reference Manual

Adding a Rogue's
Clients to the Black
List
Configuring RF
Detection Options
from the Organizer
Panel
The client black list is a switch's list of MAC addresses of wireless clients
who are not allowed on the network. MSS prevents clients on the list
from accessing the network through a WX switch.
1 In the Filtered List of rogues on the Rogue Detection tab, select the
rogues whose clients you want to place on the black list.
2 Click on the toolbar. The Select Devices dialog is displayed.
3 Select the clients you want to add to the black list.
4 If the switch(es) on which you want to enforce the black list are in a
Mobility Domain, select the Mobility Domain. Otherwise, select None.
5 Click next to Select to select all the switches that are listed, or click next
to individual switches to select them.
6 Click OK. The selected clients are added to the attack list. MSS drops all
packets from these clients.
Although the Rogue Detection toolbar options provide the simplest way
to configure rogue detection features, you also can configure them on an
individual switch basis. To configure rogue detection settings for a
switch, see "Viewing and Changing RF Detection Settings" on page

Adding a Rogue's Clients to the Black List

475
284.