Replacing The Led Board - Epson N6 Series Manipulator Manual

Maintenance 7. Boards

7.8 Replacing the LED Board

Removal (1) Turn OFF the controller.
LED Board (2) Remove the Joint #2 outside cover.
(3) Disconnect the connector connected to the LED board.
(4) Remove the LED board.
348
N6-A1000**
Cross recessed binding head
machine screws: 3-M4×8
Connector: LED_CN1
N6-A1000**
Cross recessed binding head machine screws: 2-M3×6
N6-A1000**
N6-A850**R
Cross recessed binding head
machine screws: 6-M4×8
N6-A850**R
N6-A850**R
N6 Rev.2