Epson N6 Series Manipulator Manual page 363

Installation (1) Install the LED plate to the Arm #1.
LED Plate
(2) Install the LED board.
(3) Connect the connector to the LED board.
(4) Install the Joint #2 outside cover.
NOTE

N6 Rev.2
Cross recessed binding head machine screws: 2-M3×6
Tightening torque: 0.45 ± 0.05 N·m
N6-A1000**
Cross recessed binding head machine screws: 2-M3×6
Tightening torque: 0.45 ± 0.05 N·m
N6-A1000**
Connector: LED_CN1
N6-A1000**
Be careful not to get the cables caught in the cover.
N6-A1000**
Cross recessed binding head
machine screws: 3-M4×8
Tightening torque: 0.45 ± 0.05 N·m
Maintenance 7. Boards
N6-A850**R
N6-A850**R
N6-A850**R
N6-A850**R
Cross recessed binding head
machine screws: 6-M4×8
Tightening torque: 0.45 ± 0.05 N·m
351