Remove The Brake Release Unit - Epson N6 Series Manipulator Manual

Setup & Operation 6. Options

Remove the brake release unit

(1) Turn OFF the brake release unit.
(2) Disconnect the power cable of the brake release unit.
(3) Disconnect the brake release unit from the connector of the connection cable.
(4) If the M/C short connector is connected to the M/C power cable in the Installation
(5) Connect the external short connector to the connector of the connection cable
NOTE

84
step (2), disconnect the M/C short conenctor.
The connection cable connector and the adjacent user cable connector have the same
shape. Be careful not to connect the wrong connector.
M/C cable direction: Standard (backward)
External short connector
Upward and downward
External short connector
N6 Rev.2