Epson N6 Series Manipulator Manual page 127

Installation (1) Move the Arm #1 to a position where you can install the base cover.
(2) Install the base cover.
NOTE

NOTE

N6 Rev.2
N6-A1000**
binding
Cross recessed
Tightening torque: 0.45±0.05 N·m
N6-A1000**
Be careful not to get the cables caught in the cover.
The cover may get broken if it is fastened too tight.
Be careful not to exceed the above tightening torque.
N6-A850**R
head machine screw: 4-M4×8
N6-A850**R
Maintenance 3. Covers
115