Mount The Brake Release Unit - Epson N6 Series Manipulator Manual

Mount the brake release unit

(1) Turn OFF the controller.
(2) When the M/C power cable is not connected to
(3) Disconnect the external short connector.
(4) Connect the brake release unit to the connector of the connection cable.
NOTE

N6 Rev.2
the Controller:
Connect either the M/C short connector or
the Controller.
(Keep the Controller power OFF)
The M/C short connector can be purchased
singly.
When the M/C power cable is already
connected to the Controller:
Go to the step (3).
M/C cable direction: Standard (backward)
External short connector
The connection cable connector and the adjacent user cable connector have the same
shape. Be careful not to connect the wrong connector.
M/C cable direction: Standard (backward)
Connector of
connection cable
Setup & Operation 6. Options
M/C short
connecter
Upward and downward
External short connector
Upward and downward
Connector of
connection
83