Led Status Display On The Projector - Christie Entero RPMWU-LED01 Service Manual

3.4.1 LED Status Display On the Projector

Projector status is indicated by a single 3-color LED adjacent to a 2-digit status display. See the following table
for a description of LED variations that indicate operation status. A solid red LED indicates a system error and
the corresponding error code indicates what the error is. See Table 3.2 Error Codes for a list of possible error
codes. Press Exit twice to acknowledge and clear the error code.
Table 3.1 LED Operational Status Codes
LED STATUS

Solid yellow

Solid green

Flashing green

Solid red

Flashing red
blank
blank
Entero RPMSP/RPMWU/RPMHD-LED01 Service Manual
020-100368-05 Rev. 1 (06-2012)
2-CHARACTER
DISPLAY
Rotating Warming up
Pr
(Programming TI)
FS
EM in fail safe mode
See the
(Fail-safe mode)
Upgrade Instruction Sheet (020-100443-XX)
— — Standby mode
(static)
— — Brief cool down period
(up and down)
BO (Booting) when power first applied. The projector LED will go
through phases.
B1 (Boot phase 1) starting main script
B2
(Boot phase 2) starting projector code
B3 (Boot phase 3) initializing connections
ON Projector powered on
SH
Shutter mode is active
Keypad command sent - Command received
System error, see
Keypress error
Wrong protocol sent
— —
Waiting to establish a connection with PHM
Rotating Initializing hardware and connecting to PHM
DESCRIPTION
Visual Environments Projector Software
3.4.2 Error Codes
Section 3: Troubleshooting
3-3