Connecting Devices And Establishing Communication; Projector Head Connections And Status Leds - Christie CP2309-RGB Installation And Setup Manual

Connecting devices
and establishing
communication
To display content, you must connect a device capable of storing or playing content to the projector.

Projector head connections and status LEDs

Understand the inputs on the projector.
A AES3 port for digital audio output.
B Linear Time Code (LTC) output.
C Output for multi-projector playback.
D Input for multi-projector playback (Christie Integrated Media Block (IMB) to Christie IMB only).
E SM and FIPS LED status indicators
F Indicates marriage status. In full power mode, a green LED indicates the projector is properly married
and encrypted content can be displayed. A red LED indicates marriage is broken and encrypted
content cannot be displayed.
G Resets the projector electronics. After restarting, the projector returns to its previous power mode.
CP2309-RGB Installation and Setup Guide
020-103078-04 Rev. 1 (11-2023)
Copyright © 2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
27