Display Suddenly Freezes; Colors In The Display Are Inaccurate; Display Is Not Rectangular; Display Is Noisy - Christie Mirage M Series User Manual

Display suddenly freezes

If the screen blacks out inexplicably, excessive voltage noise on the AC or ground input may
have interrupted the projector's ability to lock on to a signal.
1. Power down the projector and disconnect from AC.
2. Plug in the projector and power up as usual.

Colors in the display are inaccurate

1. The color, tint, color space, and/or color temperature settings may require adjustment at your
input source.
2. Try Auto Setup.
3. Ensure signal connections are correct.
4. Ensure the proper channel for this source is being used.

Display is not rectangular

1. Check leveling of the projector. Ensure the lens surface and screen are parallel to one another.
2. Is the vertical offset correct? Make the necessary adjustments to the vertical offset on the lens
mount.

Display is noisy

1. Display adjustment at the input source may be required. Adjust pixel tracking, phase and filter.
Noise is particularly common on YPbPr signals from a DVD player.
2. Ensure the video input is terminated (75 ohms). If it is the last connection in a loop-through
chain, the video input should be terminated at the last source input only.
3. The input signal and/or signal cables carrying the input signal may be of poor quality.
4. If the distance between the input source device and the projector is greater than 25 feet, signal
amplification/conditioning may be required.
5. If the source is a VCR or off-air broadcast, detail may be set too high.

Web interface

Learn more about resolving common web interface-related issues.
After a projector software upgrade, the web pages do not
display correctly
After an upgrade, the temporary internet files and cookies must be cleared from the web browser to
ensure that web UI changes can take effect.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Troubleshooting
123