Adding The Mirage Pro Software License To The Projector; Setting Up Christie View - Christie Mirage SST-6P User Manual

•
•
•
Adding the Mirage Pro software license to the
projector
Add the Mirage Pro software license to the projector using Christie Twist 2.5 or higher.
The Mirage Pro license must be installed on the projector for Christie View to function.
1. Record the serial number of the projector(s) and send it to Christie Technical Support
requesting the Mirage Pro software license.
The serial number is available on the projector label, from the Status > Configuration menu,
or you can send the (SST+CONF?1) serial API command.
Christie Technical Support will send zipped license file(s) to you. If you sent more than one
serial number, you will receive multiple license files as the .key file is based on the serial
number of the projector.
2. Unzip the license file(s) to a known location on your computer.
3. Make sure the projector you want to apply the license to is running and is on the same subnet
as your computer.
4. From the Start menu, select Christie > Twist 2.x > Projector License Utility.
5. In the Christie Projector License Utility dialog, click Browse.
6. Navigate to the location of the unzipped license file (.key) and select the Mirage Pro license.
7. From the Projectors list, select the projector you want to apply the upgrade to.
8. Click Apply.
9. Reboot the projector.
10. To verify the license was installed, select Menu > Admin > Licenses > View.
11. Repeat steps 3 to 10 for each additional projector.

Setting up Christie View

Follow these steps to connect the Christie View cable to the transmitter(s) and enable the input
selection.
Enabling Christie View changes the output resolution of the projector to 2K.
1. Set up the projector and connect to AC power.
Do not turn on the projector.
2. Plug the content source outputs into the projector.
3. Connect the female DB9 end of the Christie View cable into the male GPIO connector on the
projector.
Mirage SST User Guide
020-102993-06 Rev. 1 (10-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
All sources must be frame synchronous.
1920 x 1080 (FHD) image formats are supported.
1/1.001 fractional frame rates are supported.
Setting up Christie View
56