Table of Contents
Advertisement
Sorting backup files by name and date created
Locate a backup file with a specific name or creation date.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Sort the backup files:
•
To sort the backup files by name, select the Backup File Name heading.
•
To sort the files by the date they were created, select the Date Created heading.
Deleting a backup file
Delete a backup file if it is no longer required or is uploaded in error.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Select a backup file and select Delete
3. To confirm, select Delete.
Restoring settings from a backup file
Restore projector settings from a backup file.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Select a backup file and select Restore
3. Select the settings you want to restore and select Restore.
4. Select OK.
Restoring factory default settings
Restoring factory settings removes all custom projector settings.
1. In the left navigation menu, select Service Setup > Backup and Restore.
2. Select Factory Restore.
3. Select the settings you want to restore and select Restore.
4. Select OK.
Upgrading the projector software
An upgrade package is used to upgrade the projector software to the latest version. The upgrade
package is installed from a USB key or from the projector's ftpuser directory.
To obtain the upgrade package, contact Christie Technical support.
1. Power on the projector and place it in Standby mode.
CineLife+ User Guide
020-103073-10 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Backing up, restoring, and upgrading files
.
.
103
Advertisement
Table of Contents
