Backup, Restore, And Upgrade Projector Files; Upgrade The Projector Software; Back Up Projector Settings; Export Backup Settings To An External Device - Christie D4K2560 User Manual

Backup, Restore, and
Upgrade Projector Files
This section provides information and procedures for backing up, restoring, and upgrading projector
files.

Upgrade the projector software

1. On the touch panel controller, tap Admin > Upgrade.
2. Tap Upgrade.
3. To select the upgrade file, tap Browse.
4. In the Select Package dialog, navigate to the location where the upgrade file is stored.
5. Tap the upgrade file and tap Open.
6. To automatically restart the projector when the upgrade is complete, tap Restart when
update complete.
7. Tap Install.

Back up projector settings

1. On the touch panel controller, tap Admin > Backup.
2. To back up the settings, tap a backup file.
3. If required, enter or change the name.
4. Tap OK.
A message indicates the backup was successful.

Export backup settings to an external device

1. If exporting settings from the touch panel controller (TPC), insert a USB flash drive (properly
formatted as FAT or NTFS) into the USB port on the side of the TPC.
D4K2560 User Manual
020-101076-04 Rev. 1 (01-2015)
54