Network Devices Setup Window - Christie CP4230 User Manual

Section 6: Cinema Projector Menus
Table 6.28 Administrator Setup: Communications Configuration Window
Control
1: Device Name
IP Address
Subnet Mask
Gateway
Apply
Serial Speed (Baud)
Enable SNMP
SNMP V2 / SNMP
V3
Management IP
Download MIB to
USB
Apply
Serial Access
Ethernet Access
6.15.8

Network Devices Setup Window

Use the Network Devices window to view the web interface of external peripherals such as Christie ACT and
the Integrated Media Block (IMB). Tap Menu > Administrator Setup > Network Devices Setup.
6-42
Description
The name of the network device.
The IP address of the network device.
The subnet mask to which the address belongs.
The IP address for the network gateway.
Applies Ethernet settings.
The baud rate of the serial port. The default is 115200.
Enables SNMP.
The SNMP protocol type. Contact Christie for the SNMP V3 user ID and password.
The IP address where SNMP information and notifications are sent.
Sends the SNMP Management Information Base (MIB) file to a USB drive.
Applies SNMP settings.
Grants access to serial connections.
Grants access to Ethernet connections.
Figure 6-34 Administrator Setup: Network Devices Setup Window
CP4230 User Manual
020-100621-03 Rev. 1 (05-2014)