Table of Contents
Advertisement
Read/Write
Yes
Examples
Command
(MBE+USER0):OFF
(MBE+USER1):ON
Network (NET)
Use this command to modify network settings.
Subcode
Subcode
DHCP
ETH0
SUB0
GATE
HOST
MAC0
SHOW
RSTR
RSET
Read/Write
Yes
Examples
Command
(NET+DHCP0)
(NET+HOST"DWU550-G")
(NET+MAC0"00:E0:47:01:02:3C")
(NET+SHOW1)
(NET+ETH0"192.168.000.001")
G Series Serial Commands Application Guide
020-000578-02 Rev. 1 (01-2014)
Turns on screen messages off.
Turns on screen messages on.
Turns DHCP on or off.
Modifies Ethernet settings.
Modifies subnet mask settings.
Modifies gateway settings.
Modifies the projector name.
Modifies the MAC address settings.
Turns network messages on or off.
Restarts the projector.
Returns the projector name, LAN IP address, WLAN IP address, and SNMP
settings to their factory defaults.
Turns DHCP off.
Sets the projector name to DWU550-G.
Sets the MAC address to 00:E0:47:01:02:3C.
Turns network messages on.
Sets the Ethernet address to 192.168.000.001.
Description
Description
Description
Commands
40
Advertisement
Table of Contents
