Logging Into Fw Through Telnet - Zte ZXR10 8900 Series User Manual

ZXR10 8900 Series User Manual (FW Volume)
Context
Steps
6 Confidential and Proprietary Information of ZTE CORPORATION
Tip:
Both username and password are case sensitive.
E .
ND OF STEPS

Logging into FW through Telnet

It is available to log into FW module through Telnet and conduct
some basic settings on FW.
1. Selecting the interface of vlan where administrator locates and
configuring IP address for the interface.
Command
ZXR10(config-if-vlan1)#ip address <
ipaddress >< maskaddress >
Parameter Description:
Parameter
< ipaddress >
< maskaddress
>
2. Accessing FW configuration node and configuring IP address of
VLAN interface to management IP of managed FW card.
Command
ZXR10(config-fw)#bind mng-ip <slot
number >< ipaddress >
Parameter Description:
Parameter
<slot number >
< ipaddress >
3. Running telnet < ipaddress >, that is IP address configured in
step 2, on administrator PC to access configuration interface
of FW card.
E .
ND OF STEPS
Description
It is IP address, in form of A.B.C.D.
It is subnet mask, such as 255.255.255.0.
Description
It is the number of slot where FW card locates.
It corresponds to above IP address of L3 vlan
interface, in form of A.B.C.D.
Function
It configures IP
address and subnet
mask for L3 vlan 1.
Function
It configures
IP address of
VLAN interface to
management IP of
managed FW card.