Table 387 Set History Command; Table 388 Set Statistics Command - Zte ZXR10 2920 User Manual

{valid|underCreation| createRequest|invalid}} in SNMP
config mode. This is shown in Table 387.
T 3 8 7 S H
A B L E E T I S T O R Y
Format
set history <1-65535>
{datasource<portname>|bu
cketRequested <1-
65535>|owner
<string>|interval <1-3600>|
status
{valid|underCreation|
createRequest|invalid}}
Result: These create/configure instances of history group.
The command line configuration of the history group is to
configure the historyControlTable in the history group.
configuration involves:
historyControlDataSource: It is the ifIndex oid in rfc1213
interface group, for example, the oid of port 16 is 1.
6. 1. 2.
configuration, enter the port number 16 directly.
historyControlBucketsRequested: By default, it is 50.
historyControlOwner.
historyControlInterval.
historyControlStatus: It can be "valid", "underCreation",
"createRequest" and "invalid".
"invalid", the instance is deleted.
can be set to "valid" only when the data source is
specified.
3. To create/configure instances of the statistics group, use
command set
<portname>|owner
{valid|underCreation|createRequest| invalid}} in SNMP
config mode. This is shown in Table 388.
T 3 8 8 S S
A B L E E T T A T I S T I C S
Format
set statistics <1-65535> {datasource
<portname>|owner <string>|status
{valid|underCreation|createRequest|
invalid}}
Result: This create/configures instances of the statistics
group
Command line configuration of statistics group is to configure
etherStatsTable in statistics group.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 Network Management
C
O M M A N D
Mode
SNMP
config
1. 2. 2. 1. 1.
By default, it is 1, 800 seconds.
statistics <1-65535>
C
O M M A N D
Function
These
create/configure
instances of
history group
16. In command line
When it is set to
The control status
{datasource
<string>|status
Mode Function
SNMP This
config create/configure
instances of the
statistics group
Configuration involves:
The
3.
235