Command Abbreviation; History Commands - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
14 Confidential and Proprietary Information of ZTE CORPORATION
character or character string. There is no space between the
character (character string) and the question mark.
ZXR10#co?
configure copy
ZXR10#co
3. Press Tab behind the character string. If the command or
keyword beginning with this character string is unique. This
will complete the character string with space at the end.
ZXR10#con<Tab>
ZXR10#configure
4. Input ? behind the command, keyword and parameter. It
shows the keyword or parameter to be input next and its brief
explanation. There is a space in front of the question mark.
ZXR10#configure ?
terminal Enter configuration mode
ZXR10#configure
5. If incorrect command, keyword or parameter is input, the error
isolation is offered with ^ in the user interface after you press
ENTER. The ^ is below the first character of the input incorrect
command, keyword or parameter. An example is given below.
ZXR10#von ter
^
% Invalid input detected at '^' marker.
ZXR10#
An example of system clock is given below.
ZXR10#cl?
clear clock
ZXR10#clock ?
set Set the time and date
ZXR10#clock set ?
hh:mm:ss Current Time
ZXR10#clock set 13:32:00
% Incomplete command.
At the end of the above example, the system prompts that the
command is not complete and other keyword or parameter should
be input.
Note:
All commands in the command line operation are case-insensitive.

Command Abbreviation

ZXR10 5900/5200 allows the command or keyword to be abbre-
viated into a character or character string that uniquely identifies
this command or keyword. For example, the show command can
be abbreviated to sh or sho.

History Commands

The input command can be recorded in the user interface. Up to
10 history commands can be recorded and this function is useful
for invoking a long or complicated command again.
(there is a space between the configure and cursor.)