Binding Management Ip - Zte ZXR10 8900 Series User Manual

Example
S Command
tep
1
ZXR10(config)#interface vlan <vlanid>
2
ZXR10(config-if-vlan10)#bind fw-template 127
3
ZXR10(config-if-vlan10)#ip address <ipaddress><i
pmask>
4
ZXR10(config)#fw
5
ZXR10(config-fw)#bind mng-ip< ipaddress >
6 ZXR10(config-fw)#show mng-ip
7 ZXR10(config-fw)#no bind mng-ip
Command
ZXR10(config-fw)#show fw-template
<template-id>
3. Deleting fw-template configuration node (used in fw configu-
ration mode).
Command
ZXR10(config-fw)#no fw-template<
template-id >
Note:
FW-template ranges from 1 to 127.
1. To add one template whose id is 100 (or to enter the configu-
ration mode of existing fw-template whose id is 100), execute
the following command.
ZXR10(config-fw)#fw-template 100
2. To delete one template whose id is 100 (or to enter the config-
uration mode of existing fw-template whose id is 100), execute
the following command.
ZXR10(config-fw)#no fw-template 100

Binding Management IP

This topic describes how to bind and delete management IP on FW.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 4 ZXR10 FW Function Management
Function
This shows if the
configuration is
successful.
Function
This deletes the
specific fw-template.
Function
This enters L3 interface
configuration mode.
This binds fw for L3 interface
(take L3 interface in vlan10
for example here)
This configures IP address for
L3 interface (take L3 interface
in vlan10 for example here)
This enters FW configuration
mode.
This binds management IP
with FW.
This shows management IP
of FW.
This deletes management IP
of FW.
59