Relay-Agent; Show Ip Dhcp Policy - Zte ZXR10 8900 Series Command Reference Manual

Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example
Related
Commands
Purpose
the DHCP POOL that not belongs to this interface to the DHCP
POLICY, it will bring to ubnormal .
For example, the related DHCP POLICY of multiple interfaces is
created in the same DHCP POLICY set, and this DHCP POLICY is
bound to multiple interfaces at the same time. In this circum-
stance, it will bring to the DHCP POOL irrelevant with the interface
and fail to assign the address.
This example shows how to bind policy1 to interface fei_1/1.
ZXR10(config-if)#ip dhcp policy policy1
show running-config interface

relay-agent

Use this command to configure the address of relay agent. Delete
the configuration with the no command.
DHCP policy configuration mode
relay-agent <ip_addr>
no relay-agent
<ip_addr>
� The platform version 4.8.02 and upgrade versions support this
command.
� When the user accesses to the DHCP server directly, it is not
required to configure this command. When the user accesses
to the DHCP server through the relay, it is required to configure
this command.
� When the address application is implemented through DHCP
Relay, it is required to configure DHCP Relay agent. Otherwise,
it is not required to configure DHCP Relay agent.
� To support controllable access and super address pool, the
match of address pool is implemented according to the priority
and is compared according VRF and relay agent. If it matches,
the address is applied from the matched pool.
This example shows how to configure the relay agent address to
2.2.2.253.
ZXR10(config)#ip dhcp policy policy1 2
ZXR10(config-dhcp-policy)#relay-agent 2.2.2.253

show ip dhcp policy

show ip dhcp policy

Use this command to display the configuration information of DHCP
policy.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 5 DHCP Policy Configuration
IP address
127