Ip Msdp Sa-Limit; Ip Msdp Shutdown - Zte ZXR10 8900 Series Command Reference Manual

ZXR10 8900 Series Command Reference (Multicast)
Related
Commands
Purpose
Command Modes
Syntax
Description
Defaults
Instructions
Example
Related
Commands
Purpose
Command Modes
Syntax
Syntax
Description
Defaults
50 Confidential and Proprietary Information of ZTE CORPORATION
ip msdp peer
ip msdp sa-fitler in

ip msdp sa-limit

Use this command to limit the number of Source-Active (SA) mes-
sages from a Multicast Source Discovery Protocol (MSDP) peer that
the router will allow in the SA cache. Remove this limit with the
no form of this command.
ip msdp sa-limit <peer-address><sa-limit>
no ip msdp sa-limit <peer-address>
<peer-address>
<sa-limit>
By default, no SA message limit is set.
Use this command to prevent distributed denial of service attacks.
It is recommend to configure this command on all MSDP peer con-
nections.
This example describes how to configure the maximum number
of SA messages from an MSDP peer 101.1.1.1 allowed in the SA
cache to be 100.
ZXR10(config)#ip msdp sa-limit 101.1.1.1 100
show ip msdp count
show ip msdp peer
show ip msdp summary

ip msdp shutdown

Use this command to administratively shut down a configured Mul-
ticast Source Discovery Protocol (MSDP) peer. Bring the peer back
up with the no form of this command.
Global configuration
ip msdp shutdown <peer-address>
no ip msdp shutdown <peer-address>
<peer-address>
No action is taken to shut down an MSDP peer.
IP address of the MSDP peer
Maximum number of SA messages from an
MSDP peer allowed in the SA cache, range:
1~2147483646
IP address of the MSDP peer