Command Add Signature-Entry; Command Set Hit-Limit -Num - Zte ZXR10 8900 Series Command Manual

ZXR10 8900 Command Manual (DPI Volume)
Command
Function
Command Mode
Command Format
Parameter
Description
Example
Command
Function
Command Mode
Command Format
Parameter
Description
Example
12 Confidential and Proprietary Information of ZTE CORPORATION
Command add
signature-entry
This adds one signature entry for current signature symbol. Com-
mand no can be used to delete this signature entry.
Signature symbol configuration mode with prompt to be
fig-dpi-signature-symbol-n)#
add signature-entry < signature-entry-id>
no add signature-entry < signature-entry-id>
Parameter
< signature-entry-id>
To enter signature symbol configuration mode, and add signature
entry 12 for signature symbol 2, execute the following commands:
ZXR10(config-dpi)#signature-symbol 2
ZXR10(config-dpi-signature-symbol-2)#add signature-entry 12
Command set hit-limit
-num
It sets limit to signature symbol hit number and attaches one op-
tion for configuring symbol protocol type.
Signature symbol configuration mode with prompt to be
fig-dpi-signature-symbol-n)#
set hit-limit -num <hit-num>protocol-type [protocol-type]
Parameter
<hit-num>
[protocol-type]
To enter signature symbol configuration mode, set the hit number
of signature symbol 2 to 3, and set the optional protocol type to
inherit, execute the following commands:
ZXR10(config-dpi)#signature-symbol 2
ZXR10(config-dpi-signature-symbol-2)#set hit-num-limit 3
protocol-type inherit
.
Description
It is the id of signature entry, ranging from
1 to 12287.
.
Description
It is hit number, ranging from 1 to 16, 1 by
default.
Symbol protocol type is optional. The max
length of string is 32 characters. It can be set
to normal or inherit, normal by default.
ZXR10(con-
ZXR10(con-