Chapter 10 Ipv6 Qos Configuration; Ipv6 Qos Overview; Configuring Ipv6 Qos; Ipv6 Qos Configuration Examples - Zte ZXR10 5900E Configuration Manual

Chapter 10
IPv6 QoS Configuration
Table of Contents

IPv6 QoS Overview ..................................................................................................10-1

Configuring IPv6 QoS...............................................................................................10-1

IPv6 QoS Configuration Examples ...........................................................................10-1

10.1 IPv6 QoS Overview
IPv6 QoS is added with IPv6 support in addition to the functions of IPv4 QoS. For details
about QoS, refer to the section about the general description and principles of QoS in the
QoS Volume.
10.2 Configuring IPv6 QoS
The commands for configuring IPv6 QoS are similar to those for configuring IPv4 QoS,
except that IPv6 addresses are involved during the configuration. For details about the
configuration commands, refer to the section about QoS configuration in the QoS Volume.
10.3 IPv6 QoS Configuration Examples
l
Configuration Description
As shown in
whereas user2 accesses the system via the interface gei-0/1/1/2. The DSCP values
are 1 and 2 respectively. Packets are sent via the interface gei-0/1/1/3.
According to the requirements, the DSCP values of the packets of the two users sent
via the interface gei-0/1/1/3 should be 7, the guaranteed bandwidth should be 100 M,
and the maximum bandwidth should be 150 M.
SJ-20150114102049-011|2015-01-15 (R1.0)
Figure 10-1, user1 accesses the system via the interface gei-0/1/1/1
10-1
ZTE Proprietary and Confidential